Best Selling Products

Considered by many to be the best FlySky compatible receiver out there for quads, the Fli14+ offers dual antennas, telemetry, and RSSI over CH14. I...

HappyModel has been making micro motors for a long time, and their experience shows in this EX line of motors. Check out our other 1404 motors, and...

Spare replacement bell for Happymodel EX1102 motors. Check out the rest of our motor parts & accessories and our Happymodel selection! Includes...

Classic 0802 stator rated to be capable of 20,000Kv for major power, a good sweet spot for high Kv motors, where you get that extreme power without...

The Happymodel EX1002 is a 1002 brushless motor with 20000KV. This is a replacement motor for the Happymodel 1S HDZero Whoop. Check out the rest of...

The Moxon directional antenna is intended for long-range and has a more narrow field of operation. It is important to keep the Moxon antenna pointe...

The Happymodel Moblite7 HDZero Whoop is a 75mm HD brushless whoop weighing just 29.5 grams. It features the HDZero Whoop Lite VTX and Nano Camera a...

This micro brushless motor was specifically designed for 1-2s micro drones and whoops. These are made for the Mobula7 micro drone but can be used w...

Introducing the Mobula6 2024 ECO 1S 65mm ultra-light micro FPV Whoop from Happymodel, an innovative aircraft engineered for unparalleled performanc...

The Happymodel SE0802 19000KV are the direct replacement motors for the Mobula 6 HD 1S, so RDQ has you covered! It will also work great on racing w...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to star...

The lightest brushless motors all over the world, with a weight of only 1.46gram. You can build an extremely lightweight whoop with these amazing m...

This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as...

The T-Antenna is an omnidirectional antenna. It is intended for short to medium ranges and is suitable for most conditions. Check out all our RC Tr...

The CruxF405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed...

Introducing the Happymodel Mobula6 Race HD BNF - HDZero, an innovative aircraft engineered for unparalleled performance. Equipped with an all-in-on...

The world’s first AIO 5in1 F4 flight controller with an integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrat...

FrSky in stock and shipping same day! The HappyModel BNF 1S Mobula 7 HD Whoop version is a light and efficient 75mm brushless whoop which provides ...

This is a replacement frame for the Crux 35 Frame. Check out our other Crux35 accessories, as well as the rest of our HappyModel selection! Specifi...

Can be used for any build and a perfect replacement part for the HappyModel Crux3 Check out the our other motors as well as our HappyModel Crux3 Qu...

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It ha...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This receiver will let you connect to any Express...

Another Express LRS receiver but this time, it's PWM capable! The Happymodel ExpressLRS PWM Kit includes a 6CH EPW6 2.4GHz Receiver with two antenn...

This Slim Pro TX module is designed by Happymodel and based on the open-source  ExpressLRS which is a very popular low latency and high packet rate...

The Happymodel Mobula6 2024 1S 65mm Ultra Light Micro FPV 1S Whoop comes equipped with a lightweight AIO flight controller and 2.4Ghz ELRS receive...

All batteries must be shipped by a ground shipping method. Spare battery for the HappyModel Moblite7 Whoop. Check out the entire RDQ Series of LiPo...

Make your drone projects even better with this HappyModel SE0702 0702 28000Kv Micro Motor. Its high-quality design offers efficient oper...

Replacement antenna for HappyModel 2024 Mobula6 & Eco Mobula6 Looking for the 2024 Mobula6? Check out the rest of our HappyModel Collection! Sp...

The Happymodel EP2 TCXO RX is a nano-sized true diversity 2.4GHz ELRS receiver with RF amps. This TCXO Rx receiver uses a temperature-compensated c...

Turn your Mobula7 from amazing to amazingly tough! Happymodel has redesigned the Mobula7 frame, making it more rigid and durable and adding some ne...

All products containing batteries must be shipped by a ground shipping method. The Mobula6 Micro FPV Whoop features the Runcam Nano3, Onboard Frsky...

Introducing the Happymodel Mobula6 2024 Frame, a game-changer in Tiny Whoop style quad design. Weighing just 2.8g, it's the lightest Mobula6 frame ...

HappyModel has been an amazing company, bringing us FPV enthusiast quality whoops to fly. Take a look at HappyModels first ever whoop on a 85mm fra...

Introducing the Happymodel Mobula6 Freestyle HD BNF - HDZero, an innovative aircraft engineered for unparalleled performance. Equipped with an all-...

The Happymodel HDZero Lux Camera Canopy is a replacement canopy for the Mobula6 and Mobula7 Freestyle HD drones. Made from durable PP material, thi...

The Happymodel Mobula7 Freestyle BNF is whooping ready for freestyle! A 75mm ultra-light (24.5g) package, HDZero AIO5, and high-speed RS0802 KV2500...

The Happymodel EX 1103 11000KV are the direct replacement motors for the Bassline 2S, so RDQ has you covered! It will also work great one any 2" To...

This a replacement part for the Mobula8 as well as a frame to put your own parts into and create your own whoop. Where you can construct your own 2...

Spare Set of Damping Balls & Screws for the HappyModel Eco 2024 Mobula6. Looking for the 2024 Mobula6? Check out the rest of our HappyModel Col...

This is a replacement bottom plate for the Crux35 and Crux35 HD frames. Check out our other Crux35 accessories, as well as our entire Happymodel se...

Spare replacement part for the Happy Model Mobula6 Check out the rest of our Mobula 6 parts & accessories and all our HappyModel gear! Includes...

Make changing props on your Mobula7 a breeze with this quick release prop tool! Be sure to check out our tools & building supplies! Includes 1...

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. On th...

Replacement Camera for 2024 V1 Mobula6 Ultra Light! Check out the rest of our HappyModel Collection! Specifications Model: Nano7 Sensor Size: 1/...

Replacement part for the Mobula 6 HDzero whoop. Check out the rest of our Happymodel gear Includes 1x HappyModel Mobula 6 HDZero Whoop Canopy

The Happymodel OVX300 VTX is based on the Open source project OpenVTX powered by JyeSmith from the EpxressLRS team. Open VTX aims to provide firmwa...