Stacks & AIOs (FC+ESC)

RDQ Silicon Wire Roll Set so you can get your fleet back in the air! Red and Black to keep those builds organized. Check out this RDQ theme box to ...

RDQ Silicone Wire 6 Roll Set in a variety of colors! All 28AWG. Check out this RDQ theme box to keep your bench organized too! Here is our ever-exp...

We're proud to partner with Bengineering Labs to bring you this awesome life saver! Quickly know whether your quad has a short, and protect it from...

***Please note, the straight pad units are factory messups. We did not ask them to make us a straight pad board but they did. We will not be carryi...

One of those FPV racing drone hardware sets that deserves to be on EVERY build desk! Check out our other RDQ building tools and supplies! Made with...

We're proud to partner with Bengineering Labs to bring you this awesome life saver! Quickly know whether your quad has a short, and protect it from...

This LED strip is 6.5" long and contains 24 addressable LEDs. High quality LEDs put on a quality strip means that your quad will look very good for...

High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! Available Gauges  12 AWG 14 AWG 16 AWG 18 AWG...

These little nitrile rubber orings are super convenient stack spacers! This size can be used on M2 and M3 hardware, and stacked as many times as ne...

Decent, cheap snips. Ideal for cutting wire, sprue, zip ties, plastic, and can be used to trim thin copper, brass, iron and aluminum. For thicker m...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Also available in...

These little nitrile rubber orings are super convenient stack spacers! This size can be used on M3 hardware, and stacked as many times as needed fo...

Twenty-pieces of M3 SAE 304 Stainless Steel button head bolts/screws.  Durable reliable steel bolts for those M3 builds. Check out the rest of our ...

An assorted collection of Nylon hardware, is a necessity for all FPV pilots. The M3 Nylon Hex Male-Female Spacer Standoffs Screw Nut Assortment Ki...

Keep your stack locked down with this 4 pack of Nylon M2 nuts Check out the rest of our hardware! Specifications Dimensions: M2 Material: Nylon ...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

Single M3 Steel Countersunk Bolt.  Choose your size. Check out all of our M3 hardware! Includes 20x M3 Steel Countersunk Bolt 

This plate is made to go over your mini (20x20mm) flight controller, allowing you to easily mount components on top. It also simultaneously acts as...

Keep your stack locked down with this 4 pack of Nylon M3 nuts Check out the rest of our hardware! Specifications Dimensions: M3 Material: Nylon ...

Four pack anodized aluminum M3 knurled thumb nut standoff in a variety of colors sure to suit your next build. These are 7mm tall and 10mm in diame...

Individual anodized aluminum M3 knurled stack standoff in a variety of colors sure to suit your next build. These come in two sizes. One has a 6mm ...

The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful solderless AIO ready to power the DJI O3 in a simple configuration. The LUX HD AIO...

This is a M2 size grommet for savagebee or mosquito frame. Include: 1 x M2 Grommet (set of 5)

This is the PDB for the new EasyLED series. Features 2-pin JST-SH connectors. This PDB comes with 5 ports, one for power, and 4 for LEDS to plug in...

Equipped with a powerful STM32F722 MCU and sensitive MPU6500 6-axis motion sensor, the XRotor F722 Stack/Combo offers bidirectional DShot digital t...

Light up your quad with TinysLEDs Micro RaceliteWire V2 2-4S. This one-piece PCB will snap into four pieces. You will have to solder motor wires fr...

The PodliteV2 now comes with connectors to make wiring easier. Compatible with any tiny rainbow cable kits and LEDs. Adding addressable lighting to...

8x 5 volt addressable LEDs with connectors on each side. Input and Output. Connectors are sideways to make connections easier for tight spots.   Bu...

2 feet of Grey, White, Black 30 gauge Silicone wire for riggin up those addressable LED's! Check out all our LEDs and all our TinysLEDs! Features ...

The TinysLEDs Femto 4 Pro RGB LED is less than 3mm wide! It will fit on all micro frames!  4x 2020 WS2812b 5V addressable LEDs. Setup in Betaflight...

Tiny's RaceLiteWires are racewires with the addition of configurable 5050 size RGB LEDs that get brighter the harder you send it! Also available in...

LED Kit for the FlyFive33 Tiny Trainer Check out all our LEDs, and all our TinysLEDs products! Specifications Weight: 3.49g Includes 1x Whoop Po...

Whoop PodLite. Femto LED on a Whoop mounting pattern. 7x LEDs in series. 8th LED is output to all connectors for the arms.  Check out all our LEDs ...

How do you mount LEDs to the side of a quad? It has always been a challenge until now! Just Slide these on like a saddle on a horse. Easy to instal...

Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time ...

Same as the tiny ones, but a little more thin to fit on Catalyst frames.  Check out all our LEDs, and all our TinysLEDs products! Size: 6mmx30mmx...

These are the Super bright LEDs from our friends at TINYSLEDs.  Grab the larger version here Check out all our LEDs and all our TinysLEDs! Specific...

The SpeedyBee F4 3-6S 20x20 Stack/Combo (F405 FC / 35A 8bit 4in1 ESC)! Experience feature-rich performance and an unbeatable price for a...

The HOTA D6 Pro supports 2 channels of 325W charging and features a highly optimized charging algorithm with efficiency up to 94%. The Pro model ha...

The ultralight F4 1S 5A AIO Brushless Flight Controller is back in stock with new and upgraded features. Compared to the previous version, the new ...

Lightweight DJI plug and play ready 20x20 stack from T-Motor. Check out our 20x20 Flight Controllers, our DJI compatible gear, and all our T-Motor ...

With the rise of digital transmission, FLYWOO presents an innovative solution for 1-2S HD Micro Drones. The GOKU F405 HD V2 AIO integrates a Type-C...

The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-...

The BetaFPV V1 F4 2-3S AIO is the perfect choice for modern Whoop/Toothpick builds. Featuring an F4 AIO Flight Controller and 20A 4-in-1...

T-Motor's powerful F7 Flight Controller combined with the T-Motor F55A Pro II ESC will give you optimized performance and seamless integration in y...