Pigtails, Connectors & Adapters

V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digita...

This DIY wiring harness kit takes the guess work out of hunting for the perfect fit for your 4 in 1 ESCs, Flight Controllers, VTXs and Cameras! Sto...

A simple yet useful XT30 (Male) to XT60 (Female) adapter without a cable. Check out our other tools and building supplies! Includes  1x XT30 to XT...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please chec...

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

A simple yet useful XT30 (Male) to XT60 (Female) adapter with a 100mm 18AWG cable! Check out our other tools and building supplies! Includes  1x X...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

A set of 5 surface mount ufl connectors.With a little patience, repairing broken VTX and RX antenna connectors is worth the effort! Check out all o...

A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female...

This XT60 male to XT60 female adapter will allow you to connect your setups in uniques ways, perfect for testing. Check out all our pigtails and co...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please chec...

This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs! We also carry XT30 individual connectors! Be sure to check out our tools &...

An adapter made to charge your batteries with GNB27 connectors on a standard PH2.0 charge board as well as fly them on your PH2.0 micros! Check out...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 3S batteries! Note: Please chec...

A special adapter for charging your X9D LiPo Battery. Check out all our pigtails and connectors, as well as our chargers and accessories! Specifica...

Connect your RP-SMA DJI antennas to standard SMA pigtails with these adapters. If you're trying to connect an SMA antenna to the DJI Goggles this w...

Handy little metal adapters for using M2 screws on boards with M3 holes. Check out all the rest of our hardware! Includes 10x M2 to M3 Brass Adapt...

This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power a...

A note from GNB: We define this connector's "gender" by plastic not by metal bullet. Female is used on the Drone side while Male is used on the Bat...

A high quality MMCX to SMA pigtail. Available in different lengths.  Be sure to check out our tools & building supplies! Specifications Connec...

Single right angle / 45° degree SMA adapter.  Only one connector is included.  Check out all our pigtails, adapters and connectors! Includes 1x ...

This XT60 pigtail is ready to be soldered onto your rig!  Check out all our pigtails and connectors as well as tools and building supplies! Include...

The Flywoo XT30UP Black Pigtail Set provides a reliable and high-performance connection for power needs. This pair, in 18 or 20 AWG, ensures tight ...

The Flywoo XT60H 14AWG Pigtail Set provides a reliable and high-performance connection for power needs. This pair ensures tight connection for powe...

Upgrade the DJI Integra with the ORT Helical 6-Turn 5.8GHz Antenna. With a 6-Turn design, it boosts signal strength and extends signal range for FP...

USB-C to XT60 power cable for use with Toolkit RC chargers. This cable will output up to 20V DC and up to 5 Amps, depending on the Type-C power sou...

New V2 comes with a tactile power button, 6S support and a cable management kit! The plug and play Digidapter from British Drone Industries is the ...

Ensure your drone is flying at its best with these Gemfan Hurricane 3630 3.6" Tri-Blade Props. These props are durable and li...

The HD Zero MIPI Cable is a digital HD video connector between HD Zero series VTX and a MIPI camera. This MIPI cable is for use in FPV wings and mi...

This is a replacement coaxial cable for the Caddx Vista system. These are available in 8cm, 12cm, 14cm, and 20cm. Be sure to choose the appropriate...

This is your mobile FPV swiss army knife! You can flash and configure your FC & BLHeli_S ESCs, download and analyze your blackbox logs, check y...

The DJI O3 Coaxial Camera Cable is a replacement or spare for the DJI O3 Air Unit. Check out the rest of our FlyFishRC products selection! Features...

The Lumenier Camera Adapter Plates are specifically designed for the DJI O4 Air Unit. These plates ensure a perfect fit and hassle-free installatio...

Walksnail Avatar Coaxial Camera Cable. Measuring 20cm in length, this high-quality cable ensures a reliable connection between your Walksnail Avata...

While other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) a...

Premium XT30 connector. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x XT30 C...

Spare replacement lens for Walksnail Avatar Nano & Micro Cameras.Available in 9cm and 14cm. The 14cm includes a micro camera back case.  Check ...

BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S Whoop Connector is an option for you to modify your existing batteri...

The Lumenier Camera Adapter Plates are specifically designed for the DJI O4 Air Unit. These plates ensure a perfect fit and hassle-free installatio...