NewBeeDrone Frames & Accessories

This is a M2 size grommet for savagebee or mosquito frame. Include: 1 x M2 Grommet (set of 5)

Tattu R-Line 1700mAh 22.2V 95C 6S1P Lipo Battery Pack With XT60 Plug   Scary Long Flight.  This battery can potentially double your 5” flight ti...

Nitro Nectar 18650 Li-Ion Cells for Goggle Batteries These two Li-Ion cells are perfect for use in a goggle battery! With 2600mAh of capacity each ...

These M2 Flanged Nylock Nuts have a large surface area that grips the surface of props to minimize slippage during flight.  Each nut is 3mm tall to...

This is the second generation Goober Canopy that works with 14x14 size fpv camera. As long as the camera board size comes with 14X14 and side screw...

Product description Brand: NewBeeDroneItme: Wire Cover Protection TubePackage: 10 Pcs/SetColor: RedApplication: for Motor, 4 in 1 ESC etc.Specific...

NewBeeDrone VRDrone Beemote Controller V2 Specification: Remote Control -NewBeeDrone Beemote V2 VRDrone edition with BeeSign2.0 Protocol (Only Work...

NewBeeDrone Cockroach V3 65mm Brushless Ultra Light Frame   All NewBeeDrone Cockroach Frames are eligible for unlimited replacements. Find out mor...

NewBeeDrone XT60 Female to XT30 Male adapter (2Pack) 16AWG 10CM

The perfect gate to use for racing AcrboBees, TinyWhoops, or any other micro quad with bright and easy to see patterns.Each gate is made of a super...

NewBeeDrone Landing Pad The Landing Pad XL is a large 750mm in diameter folding landing pad made from the same durable material as our micro race g...

M2 Aluminum Spacer Bling out your build with these assorted colored spacers. All the spacers have a knurled texture which give you better grip when...

We installed a capacitor and TVS diode on this XT60 pigtail so you don't have to! These two components work together to limit voltage spikes from y...

Looking for a easy and affordable way to spice up your AcroBee Stack? Tired of the old clear mount that everyone has? Now you can stand out or matc...

This 3D printed Action Camera Tab works with most of the action camera mounting, adjustable camera angle in a easy way.  Include: 1x 3D Print Viv...

NewBeeDrone Cockroach V3 Carbon Fiber Motor Base   This is a accessory for Cockroach V3 frame The cockroach v3 frame can be used with or without t...

A set of whoop motor plugs to solder onto motors and plug into whoop flight controllers.  JST 1.0 fits NewBeeDrone flight controllers while JST 1.2...

Introducing the V3 of the Cockroach from NewBeeDrone!  See what they have to say about their new upgraded whoop frame! The groundbreaking Cockroach...

 The new Balloon Gates are here to bring your racing to the next level. Set up a more dynamic and 3D-looking race track with these gates. Each pack...

Whoop Screw for whoop flight controller works for most of the plastic whoop frames.  Spec: M1.2 3.8mm length  10Grams/around 100 pics per bag  

Our very own NewBeeDrone lanyard! Adjustable up to 25" inches long. Comfortable and durable, with a very convenient clip design so that you can un-...

Check out the second generation goober canopies that works with 14 x 14 size FPV cameras. As long as the camera board size has 14 x 14 mounting scr...

Spare replacement canopy for AcroBee, BLV3. Check out all our whoop frames and all our NewBeeDrone gear!  Includes 1x NewBeeDrone BeeBrain Goober ...

This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Includes 5 anti-...

JST 0.8 4 Pin Cable For The NewBeeDrone Hummingbird Mark 2 Camera or BeeBrain BLv3/BLv4 Uart port connection Overview The JST 0.8 4 pin cable can b...

This is a pack of 4 replacement 3 pin BeeEye Camera connectors made with high-quality flexible Soft PVC  Material: Soft PVC To install, simply sold...

Plagued with the current generic 2.0 plugs on the market, we got tired of being able to plug the connector in backward and possibly ruin your FC, s...

Press nuts for the NewBeeDrone Vivid 5'' Frame.

Screws that are compatible with motors 1202

Bolts for Brushless Whoop Motors such as the NewBeeDrone Brushless Gold or Plaid Motors.

Introducing the NewBeeDrone StingerBee 3" Frame Kit Body, the ultimate choice for your next FPV build. Elevate your drone building experience with ...

NewBeeDrone BeeCeiver ExpressLRS 2.4Ghz Diversity with TCXO Oscillator Micro Receiver Discover the NewBeeDrone BeeCeiver ExpressLRS 2.4Ghz Diversit...

Special version with NewBeeDrone Text around the outer ring. This handy add on will make your life more simple. Ever needed to replace the antenna ...

Use these Lipo "pig tails" to connect your XT30 Lipo to your multi-rotor or other build. Kit includes: 4X 7cm (aprox. 3.75 inch) long 20 AWG silic...

This is the Spare parts for NewBeeDrone Whirligig V2 frame Carbon Fiber Parts: Body: Top Plate& Bottom Plate with Battery pad Side Camera Plat...

Introducing the Whirligig V2 Frame! This improved version is lighter while sacrificing no durability; easy to service while sacrificing no sophisti...

A 3D printed GoPro 7 TPU mount for the NewBeeDrone Vivid HD Frame! Comes in a Hero 5/6/7 or Hero 8 size with 10, 20, and 30 degree options.

Replacement parts for the NewBeeDrone Vivid HD Frame. Replacement arms are sold as 1 Boomerang arm which can bee seen in the product picture below.

All these Vivid frame 3D printed part are available at the link below.  For the GoPro/Action Camera tab. You will need to get the M4 Hardware or yo...

Overview Do you need spare parts for your NewBeeDrone VIM V2 frame? We've got you covered with anything that you need to get back in the air. Carbo...

This is NewBeeDrone's first 5inch light weight frame for racing and freestyle.  Introducing the Turismo Frame. The Turismo Frame is an offering for...