Best Selling Products

High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! Available Gauges  12 AWG 14 AWG 16 AWG 18 AWG...

A straight style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of ...

All batteries must be shipped by a ground shipping method. The RDQ Series Batteries expand their lineup, now offering 850mah size packs in both 3S ...

A simple yet useful XT30 (Male) to XT60 (Female) adapter without a cable. Check out our other tools and building supplies! Includes  1x XT30 to XT...

We have expanded our line of building supplies with the addition of a variety of clear heat shrinks. Good for a wide range of uses, from making you...

Individual anodized aluminum M5 nylock nut with flange in a variety of colors sure to suit your next build.  Sold individually, so be sure to selec...

These low profile prop nuts are perfect for virtually any motor with an M5 shaft, the nylock makes sure they're secure during flight.Check out our ...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female...

All batteries must be shipped by a ground shipping method. The RDQ Series adds a goggle pack to the ranks! The 2S 3000mAh LiPo with Charge Indicato...

Our house brand solder has been reformulated! The new tin/lead ratio is just as strong and easy to use, but gives your finished joints maximum shin...

A must have for every build bench. Never be one screw short again! These black oxide hex head steel screws take a 1.5mm driver. These handy hardwar...

Single right angle / 90 degree SMA adapter. Only one connector is included. Check out all our pigtails, adapters and connectors! Includes 1x SMA ...

A high quality MMCX to SMA pigtail. Available in different lengths.  Be sure to check out our tools & building supplies! Specifications Connec...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Also available in...

Keep safe when it comes to your LiPo batteries and carry them easily too!  Check out all our chargers & charging accessories! Specifications ...

***Please note, the straight pad units are factory messups. We did not ask them to make us a straight pad board but they did. We will not be carryi...

Twenty-pieces of M3 SAE 304 Stainless Steel button head bolts/screws.  Durable reliable steel bolts for those M3 builds. Check out the rest of our ...

Tired of dealing with messy sponges? We've got what you need! The perfect accessory for your TS100 Soldering Iron. Be sure to check out our tools &...

Single right angle / 45° degree SMA adapter.  Only one connector is included.  Check out all our pigtails, adapters and connectors! Includes 1x ...

A rubberized, low cost, 220mm battery strap! Hold down those Batteries tight! This strap is 30mm shorter than our last strap, with 5mm longer velcr...

Individual anodized aluminum M3 stepped washers for button / pan head screws in a variety of colors sure to suit your next build.  Sold individuall...

Both stylish and functional in blue anodized machined aluminum, the RDQ prop driver wrench tool is easy to find on your bench or in the field. It'...

Never worry about struggling to tighten that SMA connection again with the SMA Grip! Others have a plastic SMA nuts that easily break upon impact b...

Lightweight linear U.FL dipole antenna, great for racing! Check out the rest of our VTX Antennas! Specifications Polarity: Linear Connector: U.FL ...

This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and ne...

A normal style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of ou...

RDQ is proud to present the Lipo Killer! The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all...

This is a compact, capable, and plug and play power supply which is immediately ready to power your ISDT Chargers. With a 400 watt and 16.7 amp pow...

These 3D printed TPU XT60 covers will protect your batteries and give you peace of mind. Handy for keeping track of which of your packs are charged...

Individual anodized aluminum M2 nylon lock nuts in a variety of colors sure to suit your next build.  Sold individually, so be sure to select the q...

This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x A...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please chec...

Individual anodized aluminum M3 knurled female standoff with small step in a variety of colors sure to suit your next build. Currently available in...

Individual anodized aluminum M3 nylon lock nuts in a variety of colors sure to suit your next build.  Sold individually, so be sure to select the q...

Our house brand solder is now available in a handy pocket dispenser, perfect for your field kit! The tin/lead ratio is as easy to work with and giv...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

A rubberized, low cost, 155mm battery strap! Hold down those Mini Batteries tight!  The length of the strap is measured without the buckle. Check o...

One of those FPV racing drone hardware sets that deserves to be on EVERY build desk! Check out our other RDQ building tools and supplies! Made with...

All batteries must be shipped by a ground shipping method. The RDQ 450mah 2S battery is a tremendous combination of performance and value. Give y...

A barbell style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of o...

T antenna tube holders compatible with both the normal and knurled M3 standoffs (not barbell/dogbone). Works perfect with the TBS Immortal T and R9...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

RX antenna tube holders compatible with both the normal and knurled standoffs.  The antenna tubes are at a 45 degree angle and come in sets of 2.  ...