HAPPYMODEL

All PRE-ORDERS shipping ASAP!! Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will...

All PRE-ORDERS shipping ASAP!! The Happymodel Mobula6 2024 1S 65mm Ultra Light Micro FPV 1S Whoop comes equipped with a lightweight AIO flight con...

All PRE-ORDERS shipping ASAP!! The Crux 35 is an ultra-lightweight 3.5Inch FPV freestyle and racing drone, the weight of the whole drone is only 87...

All PRE-ORDERS shipping ASAP!! The Happymodel Moblite 7 Walksnail Avatar Whoop is a 75mm HD brushless whoop weighing just 34.5 grams. It features t...

All PRE-ORDERS shipping ASAP!! All products containing batteries must be shipped by a ground shipping method. The Mobula6 Micro FPV Whoop features ...

All PRE-ORDERS shipping ASAP!! All batteries must be shipped by a ground shipping method. Equipped with an ExpressLRS built-in SPI receiver, you'll...

All PRE-ORDERS shipping ASAP!! Experience powerful performance with the HappyModel BNF Mobula8 1-2S HD 85mm! This amazing quadcopter comes with an ...

All PRE-ORDERS shipping ASAP!! Please note that this version is a kit and AP! does NOT come with an O3 air unit, O3 camera and SanDisk Card. Experi...

The world’s first AIO 5in1 F4 flight controller with an integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrat...

The Happymodel 1S Balance Charging Board allows you to charge up to four 1S LiPo batteries with PH2 connector at the same time. The board supports ...

EP1 Dual ELRS receiver is the hottest ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver apply “temperature com...

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. On th...

EP1 ELRS receiver is the hottest ExpressLRS receiver since it was released. Now the new TCXO version EP series receiver applies a “temperature comp...

The PP RX is designed by @Jye Smith from ExpressLRS development team. Its main hardware architecture is STM32L432KBU6 MCU and SX1280 RF chip. It ha...

The Happymodel EP2 TCXO RX is a nano-sized true diversity 2.4GHz ELRS receiver with RF amps. This TCXO Rx receiver uses a temperature-compensated c...

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.  Check out the rest of our ELRS accessories, as well as the rest of our...

This antenna is a perfect replacement for the ERLS or TBS Tracer receivers.  Check out the rest of our ELRS accessories, as well as the rest of our...

All batteries must be shipped by a ground shipping method. Spare battery for the HappyModel Moblite7 Whoop. Check out the entire RDQ Series of LiPo...

Replacement antenna for HappyModel 2024 Mobula6 & Eco Mobula6 Looking for the 2024 Mobula6? Check out the rest of our HappyModel Collection! Sp...

Get ready to experience the thrill of FPV racing with the HappyModel Bassline FPV Drone Frame Kit! This high-quality frame kit is designed for maxi...

Thanks to the new AIO flight controller and the new third-generation RS0802 brushless motor, the new Mobula7 1S Will be the best choice in the whoo...

FrSky in stock and shipping same day! The HappyModel BNF 1S Mobula 7 HD Whoop version is a light and efficient 75mm brushless whoop which provides ...

Introducing the HappyModel Bassline 2S Micro FPV Racer Drone! This high-performance drone is perfect for FPV racing and freestyle flying. With its ...

Introducing the Moblite7 Ultralight FPV Brushless Whoop! Made in collaboration with FPV pilot "Mr. Shutterbug," this whoop is one of the lightest 7...

The Happymodel Moblite7 HDZero Whoop is a 75mm HD brushless whoop weighing just 29.5 grams. It features the HDZero Whoop Lite VTX and Nano Camera a...

Introducing the Mobula6 2024 ECO 1S 65mm ultra-light micro FPV Whoop from Happymodel, an innovative aircraft engineered for unparalleled performanc...

All product containing lithium batteries must be shipped by a ground shipping method. Please be aware Betaflight 4.3.1 firmware has a bug, Please d...

All PRE-ORDERS shipping ASAP!! ELRS in stock and shipping same day! HappyModel has been an amazing company, bringing us FPV enthusiast quality whoo...

Replacement Camera Mount Bracket for 2024 V1 Mobula6 Ultra Light! Check out the rest of our HappyModel Collection! Specifications Material: PP Col...

Spare replacement Flight Controller for the Happymodel Mobula 6, and an all around incredible little TRUE AIO for any 1S brushless build!  Check ou...

The world's first AIO 5in1 whoop flight controller with built-in ExpressLRS receiver is coming out now. This F4 flight controller has a built-in 5A...

An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfec...

Equip your 2-4S drone with the HappyModel CrazyF411 F4 Flight Controller. Enjoy flying with its 20A 8Bit 4in1 ESC and ELRS 2.4GHz receiver fe...

HappyModel continues to impress with yet another fantastic AIO for whoop applications! Check out the HappyModel CrossF4 1-2S AIO Whoop Flight...

This is a replacement frame for the Crux 35 Frame. Check out our other Crux35 accessories, as well as the rest of our HappyModel selection! Specifi...

This is a replacement bottom plate for the Crux35 and Crux35 HD frames. Check out our other Crux35 accessories, as well as our entire Happymodel se...

The CruxF405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-installed...

Spare Set of Damping Balls & Screws for the HappyModel Eco 2024 Mobula6. Looking for the 2024 Mobula6? Check out the rest of our HappyModel Col...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

Another Express LRS receiver but this time, it's PWM capable! The Happymodel ExpressLRS PWM Kit includes a 6CH EPW6 2.4GHz Receiver with two antenn...

The ES24TX Pro Micro ExpressLRS TX module is a upgrade version of ES24TX module.Max output up to 1000mw, reserved Cooling Fan and RGB LED module. T...

This Slim Pro TX module is designed by Happymodel and based on the open-source  ExpressLRS which is a very popular low latency and high packet rate...

HappyModel ES900 DUAL RX ELRS Diversity Receiver 915MHz / 868MHz Built-in TCXO for RC Airplane FPV Long Range Drones.  Check out the rest of our EL...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This receiver will let you connect to any Express...

Recently the ExpressLRS system has become one of the most popular receiver systems on the market. This kit from Happymodel is a great combo to star...

Great motor for any whoop and a perfect replacement part for the Happymodel Mobula 6 HD. We also carry these motors in multiple KV options. Check o...

Great motor for any whoop and a perfect replacement part for the Happymodel Mobula 6 HD. We also carry these motors in multiple KV options. Check o...