LEDs

All batteries must be shipped by a ground shipping method. RDQ Series Lipos are known and loved by the community for their strong performance and s...

This LED strip is 6.5" long and contains 24 addressable LEDs. High quality LEDs put on a quality strip means that your quad will look very good for...

All batteries must be shipped by a ground shipping method. RDQ Series Lipos are known and loved by the community for their strong performance and s...

NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your ...

LED Kit for the FlyFive33 Tiny Trainer Check out all our LEDs, and all our TinysLEDs products! Specifications Weight: 3.49g Includes 1x Whoop Po...

Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time ...

LED Race Wire with 4 programmable LEDs per board.  Each pack comes with 4 race wires.  Add customizable lights to your builds.  Connects between mo...

The Mateksys 2812 6LED Arm set of 4X  programmable LED are perfect for making your drone visible, while adding another level of customization. Ligh...

How do you mount LEDs to the side of a quad? It has always been a challenge until now! Just Slide these on like a saddle on a horse. Easy to instal...

The Pavo Series COB LED Strip is a 5V-powered LED strip measuring 750mm x 4 mm. It provides increased visibility and facilitates easy observation o...

Pair of Matek WS2812 RGB LED Strips. Check out all our LEDs  as well as the entire Matek selection! Specifications Voltage: 5V Size: 57x8mm Inclu...

You wanted the brightest LEDs ever created for your quads? You got 'em. They're very slim and low-profile. They have an adhesive backing for eas...

The Pavo Series COB LED Strip is a 5V-powered LED strip measuring 560mm x 4 mm. It provides increased visibility and facilitates easy observation o...

Light up your quad with TinysLEDs Micro RaceliteWire V2 2-4S. This one-piece PCB will snap into four pieces. You will have to solder motor wires fr...

You wanted the brightest LEDs ever created for your quads? You got 'em. They're very slim and low-profile. They have an adhesive backing for eas...

The MATEKSYS 2812 LED Controller V2 offers easy control of WS2812 LEDs. It works for FPV racing and freestyle drones, allows customizable lighting ...

This part is perfect for your SpeedyBee Master 5 v1 & v2 Frame. This hexagonal board contains 20x 2812 LEDs that offer customizable,...

Tiny's RaceLiteWires are racewires with the addition of configurable 5050 size RGB LEDs that get brighter the harder you send it! Also available in...

After the HGLRC W2812 LED Controller has been the best-selling model aircraft for many years, this time HGLRC brings you a brand new and upgraded H...

These are the Super bright LEDs from our friends at TINYSLEDs.  Grab the larger version here Check out all our LEDs and all our TinysLEDs! Specific...

Customize your quadcopter with Flywoo's 4x10x1mm racewire LED Board! Choose from five colors - white, red, green, blue, and pink - and e...

This is the PDB for the new EasyLED series. Features 2-pin JST-SH connectors. This PDB comes with 5 ports, one for power, and 4 for LEDS to plug in...

5 Pack LED Silicone cable kit for EasyLED series PDB and LEDs These are 2 wire cables for power & ground only, making them ideal for non-addres...

Same as the little ones, just twice as many LEDs.  Check out all our LEDs and all our TinysLEDs! Specifications Voltage: 3-6s / 12-26 Volt. Size: ...

2 feet of Grey, White, Black 30 gauge Silicone wire for riggin up those addressable LED's! Check out all our LEDs and all our TinysLEDs! Features ...

HGLRC brings you a brand new and upgraded HGLRC LED Mini -（38mm). The HGLRC LED Mini (38mm) light bar can be connected directly, which is more conv...

HGLRC brings you a brand new and upgraded HGLRC LED Lite -（25mm). The HGLRC LED Lite (25mm) light bar can be connected directly, which is more conv...

Note: Use 5v Regulator on FC/ESC for 1s operation. It draws only 60mA per led board, so it will not be a lot. Most FCs will have enough overhead to...

Flywoo has just released their RGB motor LEDs compatible with any 9x9mm motor! Add these LEDs to your drones for more visibility and super glow ae...

8x 5 volt addressable LEDs with connectors on each side. Input and Output. Connectors are sideways to make connections easier for tight spots.   Bu...

Yet another amazing product from our friends over at TinysLEDS! This time we have 2-3S Micro LEDs that can be used for all of your low voltage ligh...

The TinysLEDs Femto 4 Pro RGB LED is less than 3mm wide! It will fit on all micro frames!  4x 2020 WS2812b 5V addressable LEDs. Setup in Betaflight...

Whoop PodLite. Femto LED on a Whoop mounting pattern. 7x LEDs in series. 8th LED is output to all connectors for the arms.  Check out all our LEDs ...

The PodliteV2 now comes with connectors to make wiring easier. Compatible with any tiny rainbow cable kits and LEDs. Adding addressable lighting to...

Same as the tiny ones, but a little more thin to fit on Catalyst frames.  Check out all our LEDs, and all our TinysLEDs products! Size: 6mmx30mmx...

VIFLY Strobe uses 5 3W Hi-intensity LED which provides the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA gu...

The Menace RC ON/OFF switch is capable of switching loads or auxiliary items ON/OFF by connecting to your receiver and controlling from any channel...

These RC LEDs are perfect to be seen racing, for freestyle flying, lighting up your aircraft and also excellent for creative light painting at nigh...

2.7MM WIDE - 5V COB LED Strip Light .5m / 1.65' / 19.6" Length   Product Features:- High Density: Equipped with 480 LEDs per meter, providing brill...

The Mateksys 2812 4LED Arm set of 4X  programmable LED are perfect for making your drone visible, while adding another level of customization. Ligh...

Our signature OG Version of the weBLEEDfpv Ultimate LED Whoop Gate Package is the ultimate gateway to a superior whoophaus experience. With a gener...

The brand-new Bee35 Pro - Now available with customizable LED light strip! The SpeedyBee Bee35 3.5-Inch Frame Kit is the perfect tool for any cinew...

weBLEEDfpv Ultimate LED Cube System... Insane LED System, with programmable colors and modes...Configurable modular LED Gate System, with endless e...

weBLEED LED SOUND T-SHIRTColor: BLACKStyle: Round NeckMaterial: Polyester LED Panel is detachable, material is washableBatteries NOT included, REQU...

INCLUDES:3PACK of WB LED Gates V3 - Daisy Chain Cables 2x, Power Supply 1x, 3D Printed Clips 6x, xt30-xt60 adapters 3x, Bungee Cords 6x, Battery Po...

This Pre-Built, just connect the led cables and build any type of whoop racing structure needed!  If you are Interested in the PRE-BUILT weBLEEDfpv...

Velcro & Nylon Kit for the weBLEEDfpv Ultimate LED Cube SystemIncludes: (8) 5" x 1" Male Velcro Straps(4) 2" x 2" Male Velcro Squares (8) 3/32"...