Hardware

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

Typically used to connect a device with female a XT60 plug to a DC power supply, lead acid, SLA, or Pb field battery using Alligator clips. Check o...

How do you make the best battery pad in the world even better? You make it lighter, transparent, and... blue (because why not). So that's exactly w...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

Pack of 2 interference isolation shields for 20x20 and 30x30 stacks. Place this in your stack between your FC and 4in1 ESC, and solder one of the s...

This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power a...

BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S whoop cable pigtail is an option for you to modify your drone or you...

BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  BT2.0 1S Whoop Connector is an option for you to modify your existing batteri...

BT2.0 Connector - the most significant revolution in 1S Whoop Drone!  To provide our customers with greatest convenience, we specially made this ad...

Easy to use, nicer looking, and perfect for protecting wires. Choose the right size for your build!Check out our hardware selection, all our pigta...

Spare replacement cable for use between Succex-D F7 or Succex-D F7 Mini and DJI Air Unit.  Check out the rest of our  DJI compatible gear section a...

This is that adhesive backed fabric tape you've probably seen holding motor wires on lots of pre-built micros. It's super handy stuff and its matte...

Spare replacement wing part. Just a cheap control horn & clip, with zip-tie style clamping plate and clip for push rod end. (rod not included) ...

Bullet connectors for ESC / Motor connection, or wires you want to easily disconnect. Pack of 3, available in multi sizes. Here are some guidelines...

Pair of spare replacement 1.2mm Steel Z-bend push rods. Available in multiple lengths.  Check out the rest of our servos, linkages & accessorie...

Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. These 1 meter (39.37") pultruded Carbon Fi...

Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. These 1 meter (39.37") pultruded Carbon Fib...

Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. These 1 meter (39.37") pultruded Carbon Fib...

Due to this item’s size or weight, it is not available for free shipping and may be shipped via ground. These 1 meter (39.37") pultruded Carbon Fi...

These handy little connectors are basically 3 pin XT30s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options. Quality glossy laminati...

Premium Amass XT60H connector for when the classic XT60 just won't cut it. The snap on cover for the wire side of the connector means no need for h...

Premium Amass XT60 connector. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x ...

Premium XT30 connector. Check out all our pigtails, connectors and adapters, and all our soldering supplies while you're at it! Includes 1x XT30 C...

Set of 5 simple adjustable pushrod linkages available for three rod sizes.  Check out the rest of our servos, linkages & accessories and all ou...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

This XT60 pigtail is ready to be soldered onto your rig!  Check out all our pigtails and connectors as well as tools and building supplies! Include...

Aluminum 16x19mm Wing Motor Mount w/ Screws Check out all of our wing hardware! Includes 1x Aluminum 16x19mm Wing Motor Mount w/ Screws

High-quality black M3 40mm standoffs from HQ Prop. Check out our HQProp products and the rest of our M3 Hardware! Specifications Size: M3 Weight: ...

JR type servo extensions with flat bonded wire. Available in multiple lengths. Wire color may vary as well as the wires being braided vs bonded.We ...

Connect your RP-SMA DJI antennas to standard SMA pigtails with these adapters. If you're trying to connect an SMA antenna to the DJI Goggles this w...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! This connector is commo...

This adapter will allow you to connect your Ph2.0 cables to you 1S battery checker.  Check out the rest of our pigtails, connectors and adapters! I...

Connect your SMA antennas to your DJI goggles and air units with these adapters. Check out all our pigtails, adapters and connectors! Includes 2x ...

This is a programming cable for the FrSky R-XSR receiver. This is a great tool if you have lost your cable, or if you purchased a BNF quad that did...