FPV Drone Electronics

The BETAFPV Air Brushless Flight Controller is the first 1S FC with the STM32G473CEU6, offering  lightning-fast response times, outpacing the F411....

The Happymodel SuperX AIO combines an F4 Flight Controller with a 5A 1S BLHeli_S ESC. This powerful AIO provides exceptional flight performance, ma...

The HOTA S6 supports 2 channels of 400W charging and features a highly optimized charging algorithm with high efficiency. This charger does it all,...

The ultralight F4 1S 5A AIO Brushless Flight Controller is back in stock with new and upgraded features. Compared to the previous version, the new ...

The BetaFPV F4 1S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X brushless whoop quadcopter, also great for 85mm whoop dron...

The world’s first AIO 5in1 F4 flight controller with an integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrat...

The HOTA D6 Pro supports 2 channels of 325W charging and features a highly optimized charging algorithm with efficiency up to 94%. The Pro model ha...

This is the new V3 version!  ViFly's new 1S whoop battery charger supports both PH2.0 & BT2.0 to keep you in the air no matter which connectors...

The Walksnail Avatar HD Nano Camera / Mini 1S VTX Kit features a nano digital camera, antenna,  and mini VTX that works with HD Goggles such as the...

The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-...

Featuring dual-channel 2.4GHz radios, the RP4TD excels in signal sensitivity, signal-to-noise ratio, and overall performance due to its optimized c...

A do-it-all smart charger brought to you by ToolKitRC, capable of quad charging! This charger has each of its charging ports capable of 15 amps of ...

V1.6 Ranger Micro & Nano Modules: have resolved the external power issue and have begun shipping March.  The RadioMaster Ranger Micro 2.4GHz EL...

An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfec...

With the rise of digital transmission, FLYWOO presents an innovative solution for 1-2S HD Micro Drones. The GOKU F405 HD V2 AIO integrates a Type-C...

The Walksnail Avatar HD Nano Camera V3 /  Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles su...

The HOTA F6 charger has 4 outputs, all at 250W and 15A each (or 500W x 2), so you can keep the good times flying! Additionally, it has dual USB and...

V1.6 Ranger Micro & Nano Modules: have resolved the external power issue and have begun shipping March. The RadioMaster Ranger Nano 2.4GHz ELRS...

This ultra-light F411 10A 1-2S AIO integrated flight controller comes with ExpressLRS 2.4G receiver and 400mW 5.8GHz adjustable power video transmi...

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving eve...

The RadioMaster Ranger 2.4GHz ELRS Module features a rugged CNC case and two module bay adapters. Other features include an OLED display, built-in ...

The Hota H6 Smart Charger is great for charging large batteries due to the high 700W DC input power. With AC input, it can charge with 200W. The ch...

The NewBeeDrone Hummingbird V3 AIO Flight Controller is designed for the Hummingbird F4 V2 ELRS BNF or Hummingbird F4 V3 ELRS BNF drone. Enjoy a...

Ultrapower UP7 400W 10A Dual Channel AC/DC Charger is a powerful smart charger specially designed for RC hobby. Check out our UltraPower Chargers a...

The ToolkitRC M8D charger is a powerful and versatile 1-8S charger, delivering an impressive 1600W of power and 50A of current. Featuring a user-fr...

The Hota T8 650W DC Smart Charger is small but mighty! Compact design, but packed with features to keep your batteries charged - at home or on the ...

Look at the tiny lil guy! IDST UC2 is perfect for charging 1-2S whoop packs on the fly! Check out all our chargers & charging accessories, as w...

Introducing a new 1S AIO from T-Motor which is perfect for small whoops and toothpick quads! Featuring full BLHeli_32 ESC Firmware which gives you ...

iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX is perfect for all of your lightweight builds. It is a Flig...

The CLRacing 32 Programmable RGB LED Strip will make your quad light up the sky with their 32 ultra-bright RGB LEDs! Check out all our LEDs and all...

The iSDT Q6 Retro 350W 16A 1-6S DC Battery Charger is updated and ready to keep your packs topped off and your drone in the air! This charger is co...

The ToolKitRC C6  is a compact and reliable charger with a maximum output of 50W. Its small size makes it easy to carry and use on the go, and its ...

The HOTA P24 PD Charger has an XT60 input rated for 12-27v (3-6S).  It can be powered by a Lipo Battery or using the HOTA H24 245W GaN AC Adapter a...

Note: Use 5v Regulator on FC/ESC for 1s operation. It draws only 60mA per led board, so it will not be a lot. Most FCs will have enough overhead to...

This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as...

The Ethix D6 Pro AC200W/DC650W 15A Dual Charger supports 2 channels of 325W charging and features a highly optimized charging algorithm with an eff...

The ISDT 608PD Smart Charger is part of the new generation of pocket chargers! With a 240W / 10A output it should meet all your needs for high powe...

Introducing the ToolkitRC M9 Multifunctional Charger! Not only is this charger capable of handling all you charging needs, it also functions as a s...

This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop! Also a great choice for building your own whoops! Check out a...

The ToolKitRC M8P DC charger is an essential tool for all your battery needs. With a 600W power output and a balance charge of 1-8S, you...

Customize your quadcopter with Flywoo's 4x10x1mm racewire LED Board! Choose from five colors - white, red, green, blue, and pink - and e...

An awesome little AIO from T-Motor, Coming with 6A ESCs, ELRS 2.4G onboard reciever, and a 50mw VTX with OSD! This whoop AIO board truly does it al...

Replacement all-in-one flight controller and ESC for the Tinyhawk 3. Standard 26x26 whoop mounting pattern for DIY builds. Check out the rest of th...

HappyModel continues to impress with yet another fantastic AIO for whoop applications! Check out the HappyModel CrossF4 1-2S AIO Whoop Flight...