FPV Drone VTXs

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

YMZFPV BNF Lightning2 1-2S 2" Micro Quad - ELRS 2.4GHz boasts a powerful 1003 motor. The lightweight all-aluminum frame makes an extremely durable ...

YMZFPV BNF Lightning2 2" Micro Analog Quad - 250mW VTX - ELRS 2.4GHz boasts a powerful 1003 motor. The lightweight all-aluminum frame makes an extr...

Introducing the BETAFPV Matrix 1S Brushless AIO! This user-friendly, integrated solution has a durable 1mm-thick board and built-in motor plug make...

The Walksnail Avatar GT KIT brings cutting-edge technology and performance to your FPV experience with the Avatar HD Pro Camera and Avatar GT VTX. ...

Experience unparalleled performance with the Walksnail Avatar Moonlight 4K Starlight Kit. Featuring 4k 60fps with built-in EIS and support for Gyro...

This ultra-light F411 10A 1-2S AIO integrated flight controller comes with ExpressLRS 2.4G receiver and 400mW 5.8GHz adjustable power video transmi...

The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail.  The video transmitter for the Fat Shark Dominator HD Goggle...

New from RUSHFPV, the Max Solo VTX can output 1W+! Combined with its stylistic heat sync, you'll never run into any overheating issues. This is a b...

The Caddx Nebula Pro Nano features the same great 720p/120fps performance and low 28ms latency of it's big brother the Nebula Pro Micro and weighs ...

Rush FPV has expanded its renowned Tank VTX line with the Tank Solo! This beast of a VTX is basically one giant heatsink, cranking out up to 1.6 Wa...

Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns. Checkout our VTX section and our full collection of HGLRC products! F...

Add on AGC microphone module board for Rush Tank Mini VTX.  Check out the rest of our Rush FPV selection! Features Ultra small size for easy insta...

This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibili...

The Caddx Polar Micro Vista Unit is an advanced video transmission module that supports a 5.8 GHz digital video signal and 720p 60fps image transmi...

The Walksnail Avatar HD Nano Camera V3 /  Avatar HD Mini VTX V3 features a nano digital camera, antenna, and mini VTX that works with HD goggles su...

Capture stunning aerial video with the Caddx Nebula Pro Vista Kit. This lightweight kit comes with a 12cm cable and is designed to ensure ...

The SpeedyBee TX800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations. Che...

Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped wi...

The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail.  The video transmitter for the Fat Shark Dominator HD Goggle...

Flywoo designed the O3 Ultra CNC modification kit, reducing weight by 50% respectively. This enables micro-drones to unlock their video creation...

HDZero Freestyle V2 VTX is the second generation 5.8GHz digital video transmitter, perfect for most 3.5-inch and 5-inch drones. It comes in a CNC ...

The Happymodel OVX300 VTX is based on the Open source project OpenVTX powered by JyeSmith from the EpxressLRS team. Open VTX aims to provide firmwa...

The NewBeeDrone Hummingbird V3 AIO Flight Controller is designed for the Hummingbird F4 V2 ELRS BNF or Hummingbird F4 V3 ELRS BNF drone. Enjoy a...

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving eve...

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoo...

Spare replacement VTX module for Walksnail HD Micro and Nano VTX Combos. Check out all our Walksnail HD products! Warning - Walksnail recommends t...

T-Motor's Mini F7 HD Flight Controller is loaded with lots of power and can be connected to the DJI Digital HD FPV System. Compare to standard vers...

iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX is perfect for all of your lightweight builds. It is a Flig...

Flywoo introduces a remarkable, highly integrated AlO product, the GOKU Versatile F405 1-2S, 12A 5-in-1, 400mw AlO with Built-in ELRS 2....

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp,...

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array o...

Spare replacement VTX module for Walksnail HD V2 VTX Combos.  Check out all our Walksnail HD products! Includes 1x Walksnail Avatar HD V2 VTX Mod...

Replacement antenna for the Walksnail Avatar VTX Check out all our U.FL VTX antennas and our selection of Walksnail HD products! Specifications P...

he newly refreshed Unify is here! The U.FL connector now has screws over a tiny plate to hold it in place. The connections have changed to add an a...

This is the TBS Unify PRO 5G8 V3 SMA video transmitter for FPV. The smallest and most powerful (800mW!) video transmitter the world has ever seen! ...

Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time ...

This is a specially designed heatsink for DJI O3 HD Air Unit.  It allows for improved cooling performance for the high power draw of the DJI O3 vid...

The T-Motor FT800 It is a great choice for the FPV freestyle or for those who need a accurate and reliable VTX to fly in demanding locations. Check...

The Walksnail Avatar USB-C Cable is designed exclusively for the V2 Walksnail VTX Kit. It allows for a secure and efficient connection. Engineered ...

Spare replacement power cable for use with Walksnail Avatar VTXs.  Check out all of our Walksnail HD products and FPV Goggles & Accessories! In...

The EMAX Wyvern Link (Alpha) is a high-performance 100mW VTX built with OpenIPC firmware. Featuring the IMX415 sensor, it delivers crystal-clear 12...

The EMAX Wyvern Link (Alpha) is a high-performance 800mW VTX built with OpenIPC firmware. Featuring the IMX415 sensor, it delivers crystal-clear 12...

The EMAX Tinyhawk Nanoscout AIO combines an F4 FC, 6A 1S ESC, 400mW VTX, and ELRS RX for precise control, efficient power, clear video, and long-ra...

This is a U.FL 3mm connector works for All BeeBrain Flight controller onboard VTX.  Pack of 4

This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop! Also a great choice for building your own whoops! Check out a...