FPV Drone Flight Controller Accessories

This set of 4 M2 silicone rubber vibration dampener gummies work great to help reduce flight controller vibrations on your quad. Also available in ...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

RDQ Silicone Wire 6 Roll Set in a variety of colors! All 28AWG. Check out this RDQ theme box to keep your bench organized too! Here is our ever-exp...

***Please note, the straight pad units are factory messups. We did not ask them to make us a straight pad board but they did. We will not be carryi...

High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! Available Gauges  12 AWG 14 AWG 16 AWG 18 AWG...

A reliable GPS with built in compass, all at a great price! Check out all our GPS modules! Features GPS Module, Dual Module Compass With electro...

We're proud to partner with Bengineering Labs to bring you this awesome life saver! Quickly know whether your quad has a short, and protect it from...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

These little nitrile rubber orings are super convenient stack spacers! This size can be used on M2 and M3 hardware, and stacked as many times as ne...

We're proud to partner with Bengineering Labs to bring you this awesome life saver! Quickly know whether your quad has a short, and protect it from...

RDQ Silicon Wire Roll Set so you can get your fleet back in the air! Red and Black to keep those builds organized. Check out this RDQ theme box to ...

Individual anodized aluminum M3 knurled female standoff with small step in a variety of colors sure to suit your next build. Currently available in...

One of those FPV racing drone hardware sets that deserves to be on EVERY build desk! Check out our other RDQ building tools and supplies! Made with...

This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Also available in...

These little nitrile rubber orings are super convenient stack spacers! This size can be used on M3 hardware, and stacked as many times as needed fo...

Twenty-pieces of M3 SAE 304 Stainless Steel button head bolts/screws.  Durable reliable steel bolts for those M3 builds. Check out the rest of our ...

Decent, cheap snips. Ideal for cutting wire, sprue, zip ties, plastic, and can be used to trim thin copper, brass, iron and aluminum. For thicker m...

Individual anodized aluminum M3 nylon lock nuts in a variety of colors sure to suit your next build.  Sold individually, so be sure to select the q...

Individual anodized aluminum M3 knurled stack standoff in a variety of colors sure to suit your next build. These come in two sizes. One has a 6mm ...

Individual anodized aluminum M2 nylon lock nuts in a variety of colors sure to suit your next build.  Sold individually, so be sure to select the q...

This plate is made to go over your mini (20x20mm) flight controller, allowing you to easily mount components on top. It also simultaneously acts as...

Individual anodized aluminum M2 flanged nylon lock nuts in a variety of colors sure to suit your next build.  Sold individually, so be sure to sele...

Keep your stack locked down with this 4 pack of Nylon M2 nuts Check out the rest of our hardware! Specifications Dimensions: M2 Material: Nylon ...

Keep your stack locked down with this 4 pack of Nylon M3 nuts Check out the rest of our hardware! Specifications Dimensions: M3 Material: Nylon ...

Individual anodized aluminum M3 knurled thumb nut standoff in a variety of colors sure to suit your next build. These are 7mm tall and 10mm in diam...

Single M3 Steel Countersunk Bolt.  Choose your size. Check out all of our M3 hardware! Includes 1x M3 Steel Countersunk Bolt 

**3.3 VOLTS ONLY - DO NOT USE 5 VOLTS!** We recommend an input voltage of 3.3v. The result may not be immediate, but eventually supplying voltage...

An assorted collection of Nylon hardware, is a necessity for all FPV pilots. The M3 Nylon Hex Male-Female Spacer Standoffs Screw Nut Assortment Ki...

This LED strip is 6.5" long and contains 24 addressable LEDs. High quality LEDs put on a quality strip means that your quad will look very good for...

Toward the Sky! With an even smaller GPS module from RUSHFPV! Small enough to fit on almost any drone, but with updated engines & more power! C...

A compact GPS Module from HGLRC. When you get this GPS, expect extremely fast positioning with a stable signal. All on a small form factor, you'll ...

Because the GPS chip is a new 10th generation chip, the flight controller needs to flash firmware 4.29 and above, and the firmware below 4.29 uses ...

Multipurpose buzzer from Flywoo, never lose your quad again. Check out the rest of our Buzzers & Alarms and our Flywoo gear selection! Features...

Some drones like DJI models are installed with GPS that only provide you the craft location, with the sound help, you can find your lost drone prec...

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

The HOTA D6 Pro supports 2 channels of 325W charging and features a highly optimized charging algorithm with efficiency up to 94%. The Pro model ha...

The MATEKSYS M10Q-5883 supports GNSS (GPS, GLONASS, Galileo, and BeiDou) and thus offers excellent RF sensitivity. The SAM-M10Q uses a multi-conste...

The Vifly Finder 2 is compatible with any flight controller or receiver with buzzer or pwm connection (just about everything) and its internal batt...

The newly upgraded BLITZ Mini M10 GPS V2 has arrived, offering faster and more stable satellite search with the 10th generation chipset. ...

Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...

The HGLRC M100_MINI GPS. Coming in with the new 10th generation UBLOX chip design, for fast and accurate positioning. With its small size of 15x15m...

NOTE: PICTURES ARE FROM THE OLDER VERSION. UPDATED PICTURES INCOMING Similar to the RaceWire, this product from CLRacing offers protection of your ...

Compact GPS Module from HGLRC. The HGLRC M80 PRO GPS Module comes with a QMC5883 chip to help identify the location of your drone quickly. Receives...

Avoid imminent disaster with the  JHEMCU  Smoke Stopper: A self-healing / resettable fuse in line of the power going to your quad. Be sure to check...

The Ethix D6 Pro AC200W/DC650W 15A Dual Charger supports 2 channels of 325W charging and features a highly optimized charging algorithm with an eff...

The V3.1 version of the GOKU GM10 Nano GPS retains its extremely small size and adds a new plug. No soldering is required, making it plug-and-play ...