Video Transmitters & Antennas

This is a great and quick "solder n' go" product if you need a capacitor for your quad. The capacitor and pigtail come pre-soldered together and al...

V3 now includes a voltage display, power switch and additional solder pads.This analog fat shark module adapter fits on the side of your DJI Digita...

Individual spare replacement female MMCX connector with solder posts for repairing your battered VTX. We've got replacement U.FL connectors as well...

Single right angle / 90 degree SMA adapter. Only one connector is included. Check out all our pigtails, adapters and connectors! Includes 1x SMA ...

The Most Popular Product in RDQ's History... JUST. GOT. BETTER. The Mach 3 pushes it up a notch and represents the latest and greatest the hobby ha...

A simple yet useful XT30 (Male) to XT60 (Female) adapter without a cable. Check out our other tools and building supplies! Includes  1x XT30 to XT...

Lightweight linear U.FL dipole antenna, great for racing! Check out the rest of our VTX Antennas! Specifications Polarity: Linear Connector: U.FL ...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please chec...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

A simple yet useful XT30 (Male) to XT60 (Female) adapter with a 100mm 18AWG cable! Check out our other tools and building supplies! Includes  1x X...

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

A set of 5 surface mount ufl connectors.With a little patience, repairing broken VTX and RX antenna connectors is worth the effort! Check out all o...

T antenna tube holders compatible with both the normal and knurled M3 standoffs (not barbell/dogbone). Works perfect with the TBS Immortal T and R9...

A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female...

This XT60 male to XT60 female adapter will allow you to connect your setups in uniques ways, perfect for testing. Check out all our pigtails and co...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please chec...

Used to be everyone had a pile of these laying around. If you're flying a linear dipole on your whoop and wondering where your old rubber ducky fle...

This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...

 Micro RX Antenna made for 900MHz Receivers. Check out the rest of  our RC transmitters, modules, and accessories! Specifications Frequency: 868MH...

This XT60 Parallel connector allows you to double up your flight packs. You can use two of your (Same cells count, capacity and C rating) freestyle...

A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs! We also carry XT30 individual connectors! Be sure to check out our tools &...

An adapter made to charge your batteries with GNB27 connectors on a standard PH2.0 charge board as well as fly them on your PH2.0 micros! Check out...

Connect your RP-SMA DJI antennas to standard SMA pigtails with these adapters. If you're trying to connect an SMA antenna to the DJI Goggles this w...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 3S batteries! Note: Please chec...

A special adapter for charging your X9D LiPo Battery. Check out all our pigtails and connectors, as well as our chargers and accessories! Specifica...

RX antenna tube holders compatible with both the normal and knurled standoffs.  The antenna tubes are at a 45 degree angle and come in sets of 2.  ...

Handy little metal adapters for using M2 screws on boards with M3 holes. Check out all the rest of our hardware! Includes 10x M2 to M3 Brass Adapt...

Lightweight linear MMCX dipole antenna, great for racing! Check out the rest of our VTX Antennas! Specifications Polarity: Linear Connector: MMCX ...

This is the PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more power a...

A note from GNB: We define this connector's "gender" by plastic not by metal bullet. Female is used on the Drone side while Male is used on the Bat...

A high quality MMCX to SMA pigtail. Available in different lengths.  Be sure to check out our tools & building supplies! Specifications Connec...

This 3D printed antenna holder attaches to any standoff, making antenna mounting a breeze! Check out all our 3D printed accessories! Includes 1x A...

Single right angle / 45° degree SMA adapter.  Only one connector is included.  Check out all our pigtails, adapters and connectors! Includes 1x ...

This XT60 pigtail is ready to be soldered onto your rig!  Check out all our pigtails and connectors as well as tools and building supplies! Include...

Lightweight linear 90º MMCX dipole antenna, great for racing!  Check out the rest of our VTX Antennas! Specifications Polarity: Linear Connector: ...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 2S batteries!  Note: Please che...

Connect your SMA antennas to your DJI goggles and air units with these adapters. Check out all our pigtails, adapters and connectors! Includes 2x ...

If you're tired of sticking your RX in weird places only to have it fall off mid flight then this is the 3D print for you. This little guy will sec...

Typically used to connect a device with female a XT60 plug to a DC power supply, lead acid, SLA, or Pb field battery using Alligator clips. Check o...

Our barrel jack to female XT60 connector cable allows you to charge your Fat Shark goggle packs (and other packs with barrel jack discharge leads) ...

This 3D print is meant to adapt the RDQ Series 300mah 2S 70C 7.6V HV FPV Micro Battery to several of the 2S whoops that we carry. The Mobula7 V1 or...

Convert any frame to use a 20x20 stack or even use a 30x30 4n1 ESC and 20x20 FC with this new RDQ TPU Stack adapter! NOTE: On the bottom of the ada...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 5S batteries! Note: Please chec...