Tools & Building Supplies

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

The BT3.0 2S Whoop adpater Male BT3.0 to HX2.54 cable 5 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins...

Type C 90° connector for the DJI FPV system or any other situation where you may need to plug a USB into and cannot fit. This unit is USB-C to USB-...

PTK-2240, ProTek RC Clear Double Sided Servo Tape Roll (1x40") ProTek R/C Clear Double Sided Tape is a 40" long roll of the 1" wide clear double si...

The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack ...

Rubber Damping Balls and Screw Set for Mobula7 Crazybee F3 F4 flight controller The short rubber damping ball is used for the front, the long rubbe...

Easy to use, nicer looking, and perfect for protecting wires. Choose the right size for your build!Check out our hardware selection, all our pigta...

This adapter will allow you to connect your Ph2.0 cables to you 1S battery checker.  Check out the rest of our pigtails, connectors and adapters! I...

Battery strap from RushFPV Check out the rest of our battery straps & pads and our other Rush FPV Products! Includes 1x Rush FPV 235mm Battery...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

Essentially, this adapter will allow you to connect RC Li-Po Batteries with XT60 Female Connectors to your Traxxas Vehicles that have Traxxas C...

A keychain style tool for removing those stuck in T-Mount props! Make sure to check out all of our tools and the rest of our GemFan selection! Inc...

This simplification of the 2S battery assembly is lightweight, weighing in at 1.28 grams and occupying less space than regular connectors on the ma...

3" Wing Bolts XL provide a longer reach to secure your wings. The large profile 0.5" diameter head works with a Phillips or slotted head screwdrive...

Spare replacement part for the EMAX Tinyhawk II. Check out all our TinyHawk parts, and EMAX gear! Includes 1x EMAX Tinyhawk II Hardware Kit

Spare Set of Damping Balls & Screws for the HappyModel Eco 2024 Mobula6. Looking for the 2024 Mobula6? Check out the rest of our HappyModel Col...

5 Pack LED Silicone cable kit for EasyLED series PDB and LEDs These are 2 wire cables for power & ground only, making them ideal for non-addres...

Replacement 2 pack of standoffs for the ImpulseRC Micro Apex Frames sized at 4.5mm x 20mm. Check out the ImpulseRC Micro Apex Frames and Accessorie...

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! This 90 degree connector ...

The new high quality TrueRC SMA connector, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! This connector is sized f...

You must remove the nuts in the connector for it to work with the Volador line of frame kits. Using this connector as it ships will make for improp...

Spare replacement battery pad for the FlyFishRC Volador Series.  Check out the rest of our battery straps & pads, as well as all our FlyFishRC ...

Spare replacement conical washers for ImpulseRC frames like the Apex series, or anywhere you need to spread out the force of a bolt to more area on...

A set of whoop motor plugs to solder onto motors and plug into whoop flight controllers.  JST 1.0 fits NewBeeDrone flight controllers while JST 1.2...

Tired of snapping straps when you crash? Well worry naught, with our 220mm battery strap! Now with a metal buckle for extra strength.  Worry no mo...

A30 Connectors provide a strong and reliable connection up to 15A of continuous current.   Check out all our pigtails and connectors and our select...

A must have for clean video on any quad. Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all of our tools a...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! This adapter lets you attac...

Make changing props on your Mobula7 a breeze with this quick release prop tool! Be sure to check out our tools & building supplies! Includes 1...

Tired of breaking battery straps from crashes and weak designs? The Lumenier Indestructible Kevlar Straps are guaranteed to hold up! Each strap is ...

The Lumenier branded Lipo Strap is made by Scorpion Performance. These patented lipo battery straps are rubberized on the side facing the lipo whic...

The TBS Gorilla Top Mount Adapter is designed to sit atop any 4-in-1 ESC featuring a Gorilla mounting pattern. This mount adapter includes 20x20 (M...

This is something Mr. Steele, Konasty, and SweepwingsRC of the “Team Failsafe Podcast” have been teasing about for years now! The build mat is fina...

Features New V2.0 With Goop V2.0, you'll notice that it no longer leaves a sticky residue on your fingertips. Additionally, Goop V2.0 is now easie...

When storing your tools is not just about utility but also about style, you've found a perfect match in the Ethix Tool Case. With soft suede / Alca...

PTK-1570, ProTek RC CA Tire Glue w/Glue Tip (Medium) (0.75oz) This is a 0.75 ounce bottle of ProTek R/C CA Tire Glue in Medium thickness. ProTek R/...

PTK-10046, ProTek RC 10x15x4mm Rubber Sealed "Speed" Bearing (10)This product was added to our catalog on December 16, 2021

AC power adapter for powering your TS-100 and SQ-001 soldering irons, or anything that needs 20V 3A output from a 5.5x2.5mm DC jack. Check out all ...

Features Hold down circuit boards & components Protects components from hot air Holds wires to tin Keeps components still without melting Clea...

The BT3.0 2S Whoop Connector Male/Female Set 10 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins, allowi...

The BT3.0 2S Whoop Connector Male Set 10 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins, allowing for ...

The BT3.0 2S Whoop Connector Female Set 10 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins, allowing fo...

The up to date way to fasten wings to fuselage. Includes nylon bolts, and nylon threaded blacks. 1/4-20 Thread. 11 pc set. 2 sets/pkg. Check out al...

A package of 4 durable nylon wing bolts. The outside hex head will fit your glo-plug / prop nut wrench, inside socket is made to fit standard Allen...

The Nectar Connector Gold Plated Solid Pin features brass pins coated with a 24K gold layer. This design ensures an optimized power con...

Check out the stylish SY60 connector, which comes as a transparent connector that is compatible with the AMASS XT60 connector.  Perfect for your ne...

Experience the ease and precision of the HGLRC RC1 Smart Soldering Iron. With its high-precision temperature control, you can craft and ...

Replacement part for the TS80 Soldering Iron Be sure to check out our tools & building supplies! Specifications Weight: 23g Material: ‎Stainl...