Tools & Building Supplies

New and improved Tool Bag, the case now features MOLLE snap straps that will allow you to secure it directly to the outside of your RDQ Backpack! T...

The new and improved RDQ Drone ToolKit! We listened to the community and made some changes to suit the needs of Quad Pilots. We've subbed out the n...

Single right angle / 45° degree SMA adapter.  Only one connector is included.  Check out all our pigtails, adapters and connectors! Includes 1x ...

These Hex Drivers are extremely high quality, and pair great with our titanium hardware and our prop tool. These drivers (minus the 3.0mm) are also...

A must have for all Flight Controllers! Made to help reduce the amount of noise and vibrations making it to the gyro on your FC. This is a simple w...

For all of your FPV 3D printing needs, we bring you RDQ TPU! With RDQ TPU you can expect the highest quality, rivaling top brands like Sainsmart. A...

Tools, Building Supplies, hardware, and whoop parts not included, but we do carry  everything in these photos ;) This build mat is for those of us ...

High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! Available Gauges  12 AWG 14 AWG 16 AWG 18 AWG...

The RDQ AIO Driver is a must have for your compact field kit! Machined aluminum in a sharp black and gold anodized color scheme with a laser etched...

These little nitrile rubber orings are super convenient stack spacers! This size can be used on M3 hardware, and stacked as many times as needed fo...

Our house brand solder has been reformulated! The new tin/lead ratio is just as strong and easy to use, but gives your finished joints maximum shin...

These little nitrile rubber orings are super convenient stack spacers! This size can be used on M2 and M3 hardware, and stacked as many times as ne...

RDQs newest strap offering is a perfect balance of light weight, functionality and durability. Instead of stitching a rubber sheet to the strap, ru...

Individual anodized aluminum M3 nylon lock nuts in a variety of colors sure to suit your next build.  Sold individually, so be sure to select the q...

Individual anodized aluminum M5 nylock nut with flange in a variety of colors sure to suit your next build.  Sold individually, so be sure to selec...

There isn't always someone there to be that extra set of helping hands you need...  RDQ has your back! Check out our other building tools and suppl...

RDQ Silicon Wire Roll Set so you can get your fleet back in the air! Red and Black to keep those builds organized. Check out this RDQ theme box to ...

A normal style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of ou...

A straight style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of ...

This DIY wiring harness kit takes the guess work out of hunting for the perfect fit for your 4 in 1 ESCs, Flight Controllers, VTXs and Cameras! Sto...

We're proud to partner with Bengineering Labs to bring you this awesome life saver! Quickly know whether your quad has a short, and protect it from...

RDQ is proud to present the Lipo Killer! The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

We have expanded our line of building supplies with the addition of a variety of clear heat shrinks. Good for a wide range of uses, from making you...

RDQs newest strap offering is a perfect balance of light weight, functionality and durability. Instead of stitching a rubber sheet to the strap, ru...

A simple yet useful XT30 (Male) to XT60 (Female) adapter without a cable. Check out our other tools and building supplies! Includes  1x XT30 to XT...

A simple yet useful XT30 (Male) to XT60 (Female) adapter with a 100mm 18AWG cable! Check out our other tools and building supplies! Includes  1x X...

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

For the serious builders who want to style up their quad with colored accents, this is where these come in.  Pick between Green, Blue, Orange, Red,...

A rubberized, low cost, 220mm battery strap! Hold down those Batteries tight! This strap is 30mm shorter than our last strap, with 5mm longer velcr...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please chec...

Carrying case for the TS100 Portable Soldering Iron Be sure to check out our tools & building supplies! Includes 1x Carrying Case for TS100 Po...

The mack daddy of battery straps! This cat has all the bells and whistles. Full kevlar construction with kevlar stitches, a metal buckle, and gripp...

Twenty-pieces of M3 SAE 304 Stainless Steel button head bolts/screws.  Durable reliable steel bolts for those M3 builds. Check out the rest of our ...

May need to be folded to fit in package.  If you prefer it rolled up and not creased, contact customer support for options. Quality glossy laminati...

Bullet connectors for ESC / Motor connection, or wires you want to easily disconnect. Pack of 3, available in multi sizes. Here are some guidelines...

One of those FPV racing drone hardware sets that deserves to be on EVERY build desk! Check out our other RDQ building tools and supplies! Made with...

A normal style standoff with knurled edges in assorted colors! Choose your color and size preference. Check out all our hardware and the rest of ou...

RDQ is proud to present the Lipo Suction! The Lipo Suction discharges unused batteries down to 3.8v per cell. Storing at 3.8V per cell eliminates r...

Spare / replacement heavy gauge XT30 pigtail with capacitor. We also carry a 20AWG version. Check out the rest of our pigtails & connectors! Sp...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

RDQ Silicone Wire 6 Roll Set in a variety of colors! All 28AWG. Check out this RDQ theme box to keep your bench organized too! Here is our ever-exp...

An assorted collection of Nylon hardware, a necessity for all FPV pilots. Be sure to check out our tools & building supplies! Features M2 Bl...

RDQs newest strap offering is a perfect balance of light weight, functionality and durability. Instead of stitching a rubber sheet to the strap, ru...

This set of 4 M3 silicone rubber vibration dampeners gummies work great to help reduce flight controller vibrations on your quad. Also available in...

Individual anodized aluminum M3 stepped washers for button / pan head screws in a variety of colors sure to suit your next build.  Sold individuall...

This is a replacement soldering iron tip for the TS100 & SQ-001 Digital OLED Mini Soldering Iron. Be sure to check out our tools & buildi...