Pigtails, Connectors & Adapters

The DJI O3 Coaxial Camera Cable is a replacement or spare for the DJI O3 Air Unit. Check out the rest of our FlyFishRC products selection! Features...

While other antennas rely on copycat designs the TBS Triumph takes a giant leap in 5.8 GHz antenna technology. Video Aerial Systems LLC (IBcrazy) a...

Power your GoPro with your craft's LiPo, with this Type C to Balance Head Charging Cable for GoPro Hero 6/7/8! Check out the Rest of our iFlight pr...

A30 Connectors provide a strong and reliable connection up to 15A of continuous current.   Check out all our pigtails and connectors and our select...

DJI O3 Air Unit adapter mount is made by CNC Aluminum, it can dissipate heat from the O3 Air Unit at the same time provide a strong mounting soluti...

These handy little connectors are basically 3 pin XT30s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

Introducing the ImmersionRC Camcorder A/V Cable for ImmersionRC Powerplay. The ImmersionRC Powerplay has gained popularity among skilled videograph...

These handy little connectors are basically 3 pin XT60s, They can be used on ESCs, motors, or anything with 3 wires to allow for quick connections ...

A30 Connectors provide a strong and reliable connection up to 15A of continuous current.   Check out all our pigtails and connectors and our select...

RCE1611, Battery/ESC Adapter Plug: Female TRX to Male XT60 This compact and convenient adapter plug allows the use of XT60-equipped batteries in Tr...

For those hard-to-reach DJI Air unit and Caddx Vista USB-C port connections, this is a great little adapter! Also works with flight controllers tha...

Replacement XT30 pigtail with capacitor for the Sailfly-X & Mobula7 HD, or anything using an XT30! Check out the rest of our parts and accessor...

USB-C to XT60 power cable for use with Toolkit RC chargers. This cable will output up to 20V DC and up to 5 Amps, depending on the Type-C power sou...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! Check out all our pigtails,...

This cable was designed to be an extension for the DJI Air unit. The cable that attaches the 2 connectors is 50mm long. Includes 2 cabled extension...

The BT3.0 2S Whoop Connector Male Set 10 Pack is designed for 2S batteries, featuring three gold-plated copper metal pins, allowing for ...

Premium Amass XT60H connector for when the classic XT60 just won't cut it. The snap on cover for the wire side of the connector means no need for h...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! We also carry a straight ve...

This cable allows for a larger 2 cell 8.4v battery to be used as an extended power source for the prolonged users with high output power External R...

Convert any frame to use DJI O3 Air unit.  Don't worry if your frame has the right holes! Specifications Item Name: Flywoo DJI O3 Air Unit 20x20 16...

Type C 90° connector for the DJI FPV system or any other situation where you may need to plug a USB into and cannot fit. This unit is USB-C to USB-...

Type C 90° connector for the DJI FPV system.  Check out our DJI compatible quads and accessories, and all our iFlight gear! Specifications 1x iFli...

Works with flight controllers that have a Micro USB connector using a USB Type C cord. If preferred, we also carry a version for Male USB-C to Fema...

The A30 high current connectors are an ideal fit for high-performance drones, providing a reliable connection with minimal resistance. This 5-pack ...

The Nectar Connector Gold Plated Solid Pin features brass pins coated with a 24K gold layer. This design ensures an optimized power con...

With this TBS Crossfire Nano Rx 6CH PWM Adapter, you can enable connectivities with your servos via 6ch PWM. Check out the rest of out TBS Products...

Both the full adapter and PCBA only are Beta FPV's most recently updated versions. With the use of micro to nano module adapter, a nano tx module c...

This is the replacement cable wire harness for the Runcam Micro Swift 2 Camera. Check out the rest of our replacement camera parts and all our RunC...

The new high quality TrueRC SMA adapter, with grippy knurled finish and carefully tuned design. <0.1dB loss @5.8GHz! This adapter lets you attac...

You must remove the nuts in the connector for it to work with the Volador line of frame kits. Using this connector as it ships will make for improp...

The MATEKSYS CAN-G474 enhances drone communication with its high-speed 5 Mbit/s CAN transceiver and STM32G474 MCU, built on ArduPilot's AP_Periph f...

A very handy box with some of the most commonly used silicone wires in FPV included. No more buying multiple short strands all of the different gau...

CSE011-0119-00, Castle Creations Castle Link V3 USB Programmer Adapter The Castle Creations Castle Link contains a proprietary interface adapter an...

Update your JR module to the latest revision. This unit contains the wifi module needed for CRSF communication with other devices and the TBS Cloud...

Essentially, this adapter will allow you to connect RC Li-Po Batteries with XT60 Female Connectors to your Traxxas Vehicles that have Traxxas C...

NewBeeDrone Compatible DJI O3 Coaxial Cable Work for DJI O3 Air Unit  

NewBeeDrone Goggle Battery Jack connector to XT60 adapter  Description Our barrel jack to female XT60 connector cable allows you to charge your F...

JST 0.8 4 Pin Cable For The NewBeeDrone Hummingbird Mark 2 Camera or BeeBrain BLv3/BLv4 Uart port connection Overview The JST 0.8 4 pin cable can b...

This is a pack of 4 replacement 3 pin BeeEye Camera connectors made with high-quality flexible Soft PVC  Material: Soft PVC To install, simply sold...

This is a pack of 4 replacement 5 pin Mark3 Camera made with high-quality flexible Soft PVC  Material: Soft PVC To install, simply solder the new c...

Use these Lipo "pig tails" to connect your XT30 Lipo to your multi-rotor or other build. Kit includes: 4X 7cm (aprox. 3.75 inch) long 20 AWG silic...

FUSENP-1, Fuse Battery One Piece Adapter Plug (Tamiya Male to Traxxas Female)This product was added to our catalog on December 16, 2021

3 Pin JST SM Male/Female Plug LED Connector Cable 20cm 20 AWG Wire (PAIR)Length 7.87" per side 15.74" Total

3P 15mm Male/Female LED Internal Connector (Soldering) PAIR

  AC/DC POWER ADAPTER INPUT: AC100-240V~50/60Hz OUTPUT: DC12V ~~~ 2A Works perfectly with our SP611E LED Bluetooth Music Controller It is designed ...

AC/DC POWER ADAPTER  INPUT: AC100-240V~50/60Hz OUTPUT: DC12V ~~~ 6A Connecting Plug 12mm round, works perfectly with our,  

Adapter: IC3 Device / Deans Battery