Description
The XILO Stax V3 Combo (AM32) continues XILO's tradition of offering high-quality FPV gear at a low price point. It couldn't be easier to install and use on your favorite airframe!
Use this combo for seamless integration into your quad. The Stax V3 uses a standard 30.5x30.5 mounting hole configuration. This stack includes M3 silicone mounting grommets to reduce vibrations to your electronics, ensuring accurate readings.
Check out our other 30x30 Stacks & Combos and our XILO selection!
Features
- Supports DSHOT 1200, Proshot, Oneshot125 (125-250us), Oneshot42(41.7-83.3us), and Multishot (5-25us). Auto-Detection
- Upgraded MOSFET, Allowing for Higher Amperage and Lower Resistance
- Synchronous Rectification Technology Adds Efficiency, Damped Light
- Adaptive Timing, Compatible with a Wide Range of Motors and KV
- Optimized PCB Layout Enhances Cooling and Performance
- Latest Gen. Firmware Using AM32 with Telemetry
- F4 Processors for Blazing Speed (future-proof)
- Powerful Regenerative Braking / Active Braking
- New and Improved Hardware
- Lightweight and Compact Size
- 3-6s LiPo Battery Compatible
- 50A Per Channel, 60A Burst
- Onboard Current Sensor
- 96K PMW Frequency
- WS2812b LED Strip
- Lightweight
XILO... AFFORDABILITY REDEFINED.
Upgrade your build effortlessly with the XILO Stax V3! Whether you're starting fresh or reviving an older quad, this budget-friendly FC and ESC combo gets the job done. Its plug-and-play design eliminates soldering errors—simply connect the 8-pin harness, wire up your motors and accessories, and you're ready to fly. The F4 processor ensures smooth power management, while the 4-in-1 ESC supports up to 6S input with 50A continuous current, giving you the performance and reliability to push your mini quad to the limit.
V3 UPDATES
XILO STAX V3 components help get your FPV builds just right.
- Moved the 8-pin plug to the opposite side of the ESC (also added glue to the plug for increased strength)
- An upgraded MOSFET allows for higher amperage and lower resistance
- Optimized PCB layout enhances cooling and performance
- External Capacitors Changed to 1000uF (from 470uF)
- New Powerful BEC Upgraded up to 60V Rated
- 2-8s Battery Input Higher Voltage for BEC
- Added ext. Sensor LDO for Gyro
- Additional Built-in Capacitance
- New and improved hardware
- Updated F4 Processor
- 96K PMW Frequency
- USB-C Connector
- Lighter
Specifications
FC
- Dimensions: 36 x 43mm (including the power pads)
- Smartaudio / Tramp VTX Control: Yes
- Mounting Holes: 30.5 x 30.5mm
- BEC: 5V 2A / 10V 2A
- Camera Control: Yes
- VBAT input: 8-36V
- Input: 2-8s LiPo
- PWM output: 4
- OSD: AB7456
- Processor: F4
- IMU: BMI270
- LC Filter: Yes
- Weight: 12g
- Beeper: Yes
- MCU: F405
- UARTs: 6
- I2C: 1
ESC
- Dimensions: 36 x 43mm (including the power pads)
- Weight: 10g (without motor wires)
- Constant: 50 Amps (per channel)
- Mounting Holes: 30.5 x 30.5mm
- Burst: 60 Amps (per channel)
- Input: 3-6s LiPoly
- Processor: F4
- BEC: No
Links
Includes
- 1x XILO Stax V3 F4 50A AM32 3-6S 4-in-1 ESC
- 1x XILO Stax V3 F4 Flight Controller
- 20x Black Silicone Grommets
- 1x FC Connecting Wire Set
- 2x 35v 1000uF Capacitor
- 1x XT60 Connector
- 2x 14 AWG Wire
- 1x 8pin Harness
More Information:
- SKU: 23201
- Barcode: 723326373398
