FPV Drone Flight Controller Accessories

Same as the tiny ones, but a little more thin to fit on Catalyst frames.  Check out all our LEDs, and all our TinysLEDs products! Size: 6mmx30mmx...

A smoke stopper can help avoid damage when you power on a mini quad drone for the first time. Sometimes you might have a defective part or a short ...

The Matek AP_Periph Drone CAN GNSS - M10-L4-3100 has a GPS, Compass, and Barometer! Ready for whatever your aircraft can throw at it! Check out our...

Toward the Sky! With this full feature GPS module and compass from RUSHFPV! Designed for medium to large drones, but with updated engines & mo...

 Toward the Sky! With this mini GPS module from RUSHFPV. Small enough to fit on almost any drone, but with updated engines & more power! Check ...

Included in the NewBeeDrone Wire Kit is every wire size you need to build a quad! The 14 AWG wires are great for 5" battery leads. The 18 AWG wires...

PHB2S9000120CDNS, 2S 7.6V HV + Graphene 9000mAh 120C LiPo Battery with Hardwired T-Plug, 120C Continuous / 240C BurstPerfect for 1/10 & 1/8 sca...

HGLRC brings you a brand new and upgraded HGLRC LED Mini -（38mm). The HGLRC LED Mini (38mm) light bar can be connected directly, which is more conv...

This is the PDB for the new EasyLED series. Features 2-pin JST-SH connectors. This PDB comes with 5 ports, one for power, and 4 for LEDS to plug in...

YMZFPV Wireless Simulator Adapter enables USB-cable-free controller-computer connection to play simulators. It comes in tw...

The new filtering solution for FPV hobby, it has the perfect filtering effort on high-frequency interference generated by ESC. Protect your expensi...

A set of custom-designed and printed, ultra-soft TPE grommets to fit both your whoop AIO and your VTX in a most compact way (8.5mm tall) Fits HDZer...

Experience superior navigation performance with the YMZFPV M10-5883 GPS (10th gen). Fast positioning, high accuracy, and strong signal ...

Enhance your RC car, wing, and quad with FETtec Race Wire 6 3-6S RGB LEDs (2pc). Constructed with advanced FET technology and high-quality componen...

Light up your quad with TinysLEDs Micro RaceliteWire V2 2-4S. This one-piece PCB will snap into four pieces. You will have to solder motor wires fr...

TuneRC Buzzer is an alarm system to help you locate your lost drone. This buzzer has a driver circuit built in, so you can connect it to any flight...

Check out the FETtec OSD Board which gives you on-screen display of important data, as well as full-tuning of KISS parameters. This board is suitab...

Note: The chip of GOKU GM10 V3 GPS is M10050. Only BF4.3x version firmware can use Ublox protocol. BF4.2x and earlier firmware can only use NMEA pr...

The PodliteV2 now comes with connectors to make wiring easier. Compatible with any tiny rainbow cable kits and LEDs. Adding addressable lighting to...

The RUSHFPV Blade Power Filter Board Lite was created to help ESCs achieve complete filtering due to its compact structure and high power. This spi...

8x 5 volt addressable LEDs with connectors on each side. Input and Output. Connectors are sideways to make connections easier for tight spots.   Bu...

The Airbot OpenLager gives the capability of black box recording to any drone that doesn't have it. This is fantastic for tuning and finding issues...

2 feet of Grey, White, Black 30 gauge Silicone wire for riggin up those addressable LED's! Check out all our LEDs and all our TinysLEDs! Features ...

The TinysLEDs Femto 4 Pro RGB LED is less than 3mm wide! It will fit on all micro frames!  4x 2020 WS2812b 5V addressable LEDs. Setup in Betaflight...

Tiny's RaceLiteWires are racewires with the addition of configurable 5050 size RGB LEDs that get brighter the harder you send it! Also available in...

Clean up your video during those high throttle punch outs with this high quality Rubycon Capacitor from Japan. Check out all our Low-ESR capacitors...

LED Kit for the FlyFive33 Tiny Trainer Check out all our LEDs, and all our TinysLEDs products! Specifications Weight: 3.49g Includes 1x Whoop Po...

Whoop PodLite. Femto LED on a Whoop mounting pattern. 7x LEDs in series. 8th LED is output to all connectors for the arms.  Check out all our LEDs ...

How do you mount LEDs to the side of a quad? It has always been a challenge until now! Just Slide these on like a saddle on a horse. Easy to instal...

Tiny's RaceLiteWires Minis are race wires with the addition of configurable RGB LEDs that get brighter the harder you send it! Also available in fu...

Pack of 2 interference isolation shields for 20x20 and 30x30 stacks. Place this in your stack between your FC and 4in1 ESC, and solder one of the s...

A great way to reduce the amount of unwanted noise that makes it to your gyro. When used properly, this is a simple way to make your quad fly bette...

Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time ...

Can be used with any 8 pin stacks, just make sure to re-pin when necessary! Specifications Length: 72mm end to end Includes 1x Airbot 4in1 ESC t...