Walksnail Avatar HD Micro Camera & VTX Kit V2 - 32GB

Description

The Micro Camera and VTX Combo for Fat Shark Dominator HDO3 are provided by WalkSnail. 

The video transmitter for the Fat Shark Dominator HD Goggles and Walksnail Goggles has arrived! The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S.  The VTX is resistant to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and an 8GB and 32GB built-in storage option. The 32GB VTX delivers unmatched stability due to the aid of being equipped with Gyroflow technology. This allows super smooth and stabilized video from your FPV system. Enjoy the unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology! 

Check out all our Walksnail HD products! 

Features

• Compatible with FatShark Dominator HD FPV Goggles
• Canvas mode and distance detection with the dual-antenna system
• Reliable digital HD video transmission (1080P – H.265 encoding)
• Ultra low-latency (22ms)
  
• 2K pixel, 120fps, 4:3 native sensor
• Support Gyroflow
• 1080P HD FPV
• F/2.0 Large Aperture
• 160° wide-angle FOV

VTX Specifications

• Communication Frequency: 5.725-5.850GHz
  
• Transmitter Power: (EIRP) FCC:<30dBm;CE:<14dBm;SRRC:<20dBm;
  
• MIC:<25dBm
  
• 1/O Interface: JST1.0x4(Power in)JST0.8x6(USB)
  
• Mounting Holes: 25.5x25.5mm; 20x20mm
  
• Dimensions: 33.5x33.5x10.5mm
  
• Storage: 32G
  
• Recording: 1080p/720p
  
• Weight: 17.6g
  
• Operating Temperature: -20-40℃
  
• Channels: 8
  
• Wide Power Input: 6V-25.2V
  
• Supported FC System: Betaflight; Inav; Fettec; ArduPilot; Kiss
  
• OSD: Canvas mode
  
• Latency Average delay: 22ms
  
• Antenna: 1(IPEX)

Camera Specifications

• Model: Avatar V2 camera
• Image Sensor: 1/3.2-Inch 4Mp 4:3sensor
• Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
• Ratio: 4:3 native /16:9
• Lens: 2.1mm
• FOV: 160°
  
• Aperture: F2.0
  
• Shutter: Rolling shutter
  
• Min.Illumination: 0.001Lux
  
• Weight: 7.2g
  
• Dimensions: 19x19x22mm
  
• Coaxial Cable: 140mm
  
• Gyroflow: supported/ non-supported, two version

Antenna Specifications

• Polarization: LHCP
  
• Bandwidth: 5600MHz-6000MHz.
  
• Gain: 1.9dBi
  
• VSWR: ≤1.5
  
• Input Impedance: 50Ω
  
• Interface: IPEX-1
  
• Size: R15x45mm (without cable）
  
• Weight: 2g

Includes

• 1x USB transfer extension cable 
  
• 1x 4 Pin silicone cable
  
• 8x M2x4mm screws
  
• 4x M2x5mm screws
  
• 4x M2x6mm screws
  
• 4x M2x14mm screws
  
• 4x M2x5x0.5mm gasket