Products

Spare replacement Flight Controller for the Happymodel Mobula 6, and an all around incredible little TRUE AIO for any 1S brushless build!  Check ou...

The world's first AIO 5in1 whoop flight controller with built-in ExpressLRS receiver is coming out now. This F4 flight controller has a built-in 5A...

An F405 chip FC with built-in Serial ELRS receiver, 4in1 12A ESC, and 8Mbp black box. Optimized layout, supports 1-2S Lipo/LiHV. Perfec...

Equip your 2-4S drone with the HappyModel CrazyF411 F4 Flight Controller. Enjoy flying with its 20A 8Bit 4in1 ESC and ELRS 2.4GHz receiver fe...

HappyModel continues to impress with yet another fantastic AIO for whoop applications! Check out the HappyModel CrossF4 1-2S AIO Whoop Flight...

Replacement part for the HappyModel Crux3 Check out the HappyModel Crux3 Quad and Accessories Collection. Includes 1x HappyModel Crux 3 Canopy - ...

This is a replacement frame for the Crux 35 Frame. Check out our other Crux35 accessories, as well as the rest of our HappyModel selection! Specifi...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

This 5-in-1 flight controller is inspired by Happymodel's Official Pilot - Angry Don FPV! The Happymodel Diamond F4 AIO 5-IN-1 Flight controller ha...

Replacement part for the Mobula 6 HDzero whoop. Check out the rest of our Happymodel gear Includes 1x HappyModel Mobula 6 HDZero Whoop Canopy

Introducing the Happymodel Mobula6 Race HD BNF - HDZero, an innovative aircraft engineered for unparalleled performance. Equipped with an all-in-on...

Introducing the Happymodel Mobula6 Freestyle HD BNF - HDZero, an innovative aircraft engineered for unparalleled performance. Equipped with an all-...

The Happymodel Mobula7 Freestyle BNF is whooping ready for freestyle! A 75mm ultra-light (24.5g) package, HDZero AIO5, and high-speed RS0802 KV2500...

Rubber Damping Balls and Screw Set for Mobula7 Crazybee F3 F4 flight controller The short rubber damping ball is used for the front, the long rubbe...

This a replacement part for the Mobula8 as well as a frame to put your own parts into and create your own whoop. Where you can construct your own 2...

The Happymodel OVX303 VTX is based on the Open source project OpenVTX powered by Jye Smith from the EpxressLRS team. Open VTX aims to provide firmw...

It's finally here! The ultralight 1s 5a AIO of the future comes in at a clean 2.8g. This is the AIO that got the mobula6 HDZero whoop under 25 gram...

The Super F405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-install...

The Happymodel SuperX AIO combines an F4 Flight Controller with a 5A 1S BLHeli_S ESC. This powerful AIO provides exceptional flight performance, ma...

This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as...

The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-...

The X12 lite does away with the onboard VTX, shedding weight and giving you the option to add your own VTX. It also comes with an onboard ELR...

HDZero AIO5 is the world’s first digital video AIO, enabling bind and fly 65mm whoops to weigh less than 19.4g. AIO5 integrates a F4 flight control...

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving eve...

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoo...

The HGLRC Drashark Analog 1S 1.6" Toothpick Micro Quad - ELRS 2.4GHz is perfect for both beginners and experienced drone pilots. This bu...

All products containing batteries must be shipped by a ground shipping method. The ultimate Beginner RTF kit is here! HGLRC Draknight 2" 2S Beginne...

A stellar micro drone from HGLRC, a 2" toothpick frame focusing on high-efficiency and low-noise flight performance. This frame comes with a lightw...

This ultra-light F411 10A 1-2S AIO integrated flight controller comes with ExpressLRS 2.4G receiver and 400mW 5.8GHz adjustable power video transmi...

Experience unparalleled flight performance with the HGLRC Specter AIO, designed to elevate your flying experience. This advanced flight controller ...

The HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) comes with an STM32F722 processor, MPU6000 gyroscope, a ca...

The HGLRC Talon Frame Set features a one-piece modular design for 2-inch drones. This frame is lightweight and aerodynamic. Its modular structure s...

The HGLRC Y6 5" LR Frame Kit features a Y type layout, offering new advantages while flying. With a 50% increase in the propeller area, it carries ...

Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns. Checkout our VTX section and our full collection of HGLRC products! F...

The Holybro Kakute G473 AIO packs a ton of features into a compact and powerful flight controller + 4in1 ESC board. It's plug-and-play...

A serious fixed-wing pilot can count on the Holybro Kakute H743 Wing flight controller for powerful operation and reliable performance. ...

A serious fixed-wing pilot can count on the Holybro Kakute H743 Wing flight controller for powerful operation and reliable performance. ...

The iFlight AOS 7 EVO 7" Frame Kit is perfect for freestyle drone racing. Constructed with 8mm arm thickness for superior durability and...

iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX is perfect for all of your lightweight builds. It is a Flig...

This is our new iFlight BLITZ series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for ...

The iFlight BOB57 is a long-range HD drone that was designed in collaboration with pilot & videographer Ellis van Jason. The team crafted this ...

An awesome little AIO from iFlight, Coming with 20A ESCs, DJI ready header for an air unit or Caddx Vista, and a nice open pad layout to get all yo...

Say goodbye to dirt and grass clogging up your electronics after a crash! This latest frame ensures your flight controller and ESCs s...

Say goodbye to dirt and grass clogging up your electronics after a crash! This latest frame ensures your flight controller and ESCs stay clean, ...

The iFlight Nazgul XL5 Frame Kit is ready for a custom build. From a long line of tested BNF drones, the Nazgul XL5 is a durable frame just waiting...

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp,...

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp,...

The ApexLR EVO  7" Frame is the ideal companion for exploration and videography that demands extra range. It has special arm geometry for motors no...