Happymodel SuperX AIO - F4 FC + 5A 1S BLHeli_S ESC

Description

The Happymodel SuperX AIO combines an F4 Flight Controller with a 5A 1S BLHeli_S ESC. This powerful AIO provides exceptional flight performance, making it ideal for ultralight whoops and other micro drones. The F4 FC is responsive, while the 5A ESC, with BLHeli_S, provides reliable power delivery. Its light as a feather, packed with features, the SuperX AIO is perfect for an upgrade or your next micro!

Check out our other whoop flight controllers, and the rest of our Happymodel offerings.

Features

• Compact and Lightweight
  
• F4 Flight Controller
  
• Ideal for Upgrades
  
• 5A BLHeli_S ESC

Specifications

ELRS RECEIVER

• ExpressLRS Firmware Target: HappyModel AIO 2.4GHz RX+VTX (ExpressLRS web flasher)
  
• Firmware Update: Can flash single ELRS receiver firmware via Wi-Fi
  
• Compatibility: Compatible with ExpressLRS V3.x.x TX Module
  
• Packet Rate Option: 50Hz/150Hz/250Hz/500Hz
  
• Available From: ExpressLRS version 3.4.0 RC2
  
• Antenna: Enameled copper wire antenna
  
• Receiver Protocol: Serial-based CRSF
  
• ExpressLRS Firmware Version: V3.0
  
• Telemetry Output Power: <12dBm
  
• RF Frequency: 2.4GHz

FLIGHT CONTROLLER

• MCU: STM32F411CEU6 (100MHz, 512K FLASH), ESP32-PICO-D4
  
• Built-in Current Meter Sensor: Current meter scale 1175
  
• Built-in Voltage Meter Sensor: Voltage meter scale 110
  
• Built-in 5.8G OpenVTX: 0mw~400mw (MSP control)
  
• Power Supply: 1S battery input (DC 2.9V-4.35V)
  
• Built-in 5A (each) BLHeli_S: 4-in-1 ESC
  
• Built-in Betaflight OSD: (SPI Control)
  
• Mount Hole Size: 25.5mm x 25.5mm
  
• Sensor: BMI270 (SPI connection)
  
• Built-in UART: ExpressLRS v3.0.0

ESC

• Recommended ESC Startup Power Value: Min 1100 / Max 1200
  
• Current: 5A continuous, peak 6A (3 seconds)
  
• Support: BLHeliSuite programmable
  
• Factory Firmware: Bluejay v0.19.2
  
• Power Supply: 1S LiPo/LiPo HV
  
• Firmware Target: O-H-5 48kHz
  
• Default Protocol: DSHOT300

5.8GHz VTX

• Transmitting Power: 0/RCE/25mw/100mw/400mw
  
• Current (5V): <650mA (400mw)
  
• Firmware Version: OPENVTX
  
• Antenna Connector: U.FL
  
• Power Supply: DC 5V
  
• PIT Mode: Support
  
• Channels: 40ch
  
• VTX: MSP

Includes

• 1x Happymodel SuperX AIO - F4 FC + 5A 1S BLHeli_S ESC