GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - ELRS 2.4GHz (GPS)

Description

Check out our other pre-built quads, as well as the rest of our GEPRC selection.

Features

• New appearance design, strengthening carbon plate, hollow design, injection protection frame, noise reduction design, flight safety, silent.
• Adopts the GEP F722-45A AIO V2 high performance flight controller.
• Propeller Guard adds memory card and USB ports to O3 Air Unit for easy data reading
• For O3 camera design independent under hanging shock absorption gimbal, to solve the camera IMU resonance issues, to achieve the optimal anti-shake effect.
• SPEEDX2 2105.5 motor with HQ DT90 propeller, stable power output, and smooth flight feel.
• Power cable using XT60E1-M plug and carbon plate integrated design, convenient application.
• Battery installation method using a tie with 7075 aluminum parts fixed, solid and stable.
• Carefully tuned 3.5-inch HD cinematic FPV quad with flexible and delicate flight feeling.
• Pre-Installed with a M8U GPS

Specifications

• Model: Cinelog35 V2 HD Avatar
  
• Frame: GEP-CL35 v2
  
• Wheelbase: 142mm
  
• Gimbal plate: 2.0mm
  
• Top plate: 3.5mm
  
• Bottom plate: 1.5mm
  
• FC system: GEP-F722-45A AIO V2
  
• MCU: STM32F722RET6
  
• Gyro: ICM 42688-P
  
• OSD: Betaflight OSD w/AT7456E chip
  
• ESC: 8Bit 45A
  
• VTX: Avatar V2 module（Integrated 32G RAM）
  
• Camera: Avatar HD Camera v2(Comes with Gyro and Supports Gyroflow)
  
• Antenna: GEPRC Peano 5.8G LHCP UFL
  
• Motor: SPEEDX2 2105.5-2150KV (6S)
  
• Propeller: HQProp D-T90MM
  
• GPS: GEP-M8U
  
• Receiver: ELRS24
  
• Recommended battery: LiPo 1050mah-1300mah
  
• Flight time: 5′00″ - 8′ 30″

Includes

• 1x GEPRC BNF CineLog35 V2 HD 6S 3.5" Cinewhoop w/ Walksnail Avatar V2 & Avatar Micro Cam V2 - ELRS 2.4GHz
• 2x HQProp D-T90MM（2 pairs）
  
• 2x M20 x 250mm battery strap
  
• 2x Battery Silicone Pads
  
• 1x Set of screws
  
• 1x L-shaped screwdriver (1.5mm)
  
• 1x L-shaped screwdriver (2mm)
  
• 1x L-shaped screwdriver (3mm)
  
• 1x M5 wrench
  
• 1x plastic tweezers
  
• 1x Antenna fixed tube (pair)
  
• 1x Keychain
  
• 1x GP Camera Mounting Base
  
• 1x Naked GP Camera Mounting Base
  
• 1x Antenna Mounting Base