Hardware

Single M3 Steel Countersunk Bolt.  Choose your size. Check out all of our M3 hardware! Includes 20x M3 Steel Countersunk Bolt 

Do you have a hard time finding 8 screws the exact length for your T-mount props? Well, we've got you covered with not 8, but 10 M2 button head T-m...

The Flywoo M2 Hardware Pack is your all-in-one screw solution for all your building needs! Also includes damping balls, gaskets, capacitors, stando...

The Flywoo M3 Hardware pack is your all-in-one screw solution for all your building needs! Also includes damping balls, gaskets, capacitors, stando...

Single right angle / 90 degree SMA adapter. Only one connector is included. Check out all our pigtails, adapters and connectors! Includes 1x SMA ...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 4S batteries! Note: Please chec...

Enough Heat Shrink to satisfy all your quad building needs! Check out the rest of our Tools & Building Supplies! Includes 1 x Heatshrink Tube...

This 3" SMA to UFL pigtail will fit most VTXs with the same connector. Check out the rest of our pigtails, adapters & connectors! Includes 1x ...

This is the latest PH 2.0 solid pin pigtail connector, AKA the "Power Whoop Connector". This connector will allow you to fly longer, and with more ...

This XT60 pigtail is ready to be soldered onto your rig! With 14awg wire, and being about 4 inches long, it's ready to fly! We also have 4 packs in...

Clean up your video during those high throttle punch outs with this high quality capacitor from Japan.  Check out all our Low-ESR capacitors specif...

Clean up your video during those high throttle punch outs with this high quality capacitor from Japan. Check out all our Low-ESR capacitors or all ...

Every OCD builder out there needs a way to hide all of those normal looking cables... so here you go!  3/8th of a inch to fit all of your normal mo...

A high quality MMCX to SMA pigtail. Available in different lengths.  Be sure to check out our tools & building supplies! Specifications Connec...

A XT30 pigtail with 3 inches of 16AWG cable for all of your micro needs! We also carry XT30 individual connectors! Be sure to check out our tools &...

High quality silicone insulated wire. 1 ft. of each*, red and black. Choose the gauge you'd like! Available Gauges  12 AWG 14 AWG 16 AWG 18 AWG...

This plate is made to go over your mini (20x20mm) flight controller, allowing you to easily mount components on top. It also simultaneously acts as...

 When every part of your quad must perform, don’t let your battery pad be the weak link. After an exhaustive search, Tommy Tibajia (Ummagawd) found...

Can be used with any 8 pin stacks, just make sure to re-pin when necessary! Specifications Length: 72mm end to end Includes 1x Airbot 4in1 ESC t...

A high quality 90° MMCX to SMA pigtail.  Be sure to check out our tools & building supplies! Specifications Connector: MMCX Male to SMA Female...

This DIY wiring harness kit takes the guess work out of hunting for the perfect fit for your 4 in 1 ESCs, Flight Controllers, VTXs and Cameras! Sto...

A set of 5 surface mount ufl connectors.With a little patience, repairing broken VTX and RX antenna connectors is worth the effort! Check out all o...

MMCX to SMA Adapter Connector Check out all our pigtails, adapters and connectors! Includes 1x MMCX Male to SMA female adapter

The Forever Antenna Tube is the best way to protect your receiver antennas! Available in a number of colors, you receive two tubes and two black ca...

Replacement EZO bearing for motors. Check out our other tools and building supplies! Includes 4x EZO 9x4x4 Motor Bearing 

Replacement EZO bearing for motors. Check out our other tools and building supplies! Includes 4x EZO 8x4x3 Motor Bearing 

Replacement EZO bearing for motors. Check out our other tools and building supplies! Includes 4x NSK 8x3x4 Motor Bearing

Clean up your video with this premium capacitor! Check out all our Low-ESR capacitors or all our capacitors & accessories. Check out all...

A wide assortment of heat shrink.  Check out our other building tools and supplies! Includes 1x Heatshrink Tube Set (530PC)

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 5S batteries! Note: Please chec...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 6S batteries! Note: Please chec...

Do you feel the separation between your craft and its power source? Time to blur that line and make the 2 feel as 1... LiPo-Lock not only helps sup...

Are you tired of trying to solder wires on those pesky little capacitor leads? Step your builds up a notch with WaFL’s Cap Cap. This tiny PCB sits ...

Single right angle / 45° degree SMA adapter.  Only one connector is included.  Check out all our pigtails, adapters and connectors! Includes 1x ...

RDQ is proud to present the Lipo Suction! The Lipo Suction discharges unused batteries down to 3.8v per cell. Storing at 3.8V per cell eliminates r...

Plug in your VTx at any time with 0 power start-up! Check out all our LEDs, and all our TinysLEDs products! Features Plug in your VTx at any time ...

The XT60 Cap Cap makes soldering a capacitor to your XT60 a painless process. Perfect for tight mini-quad builds, the XT60 cap cap makes your cap e...

RDQ is proud to present the Lipo Killer! The Lipo Killer discharges old or damaged batteries you wish to dispose of down to 0v. This eliminates all...

Whether you are flying 180, 200, 220, 250 or even  300 size quad... these neoprene landing pads are perfect for every quad!  With the ability to ta...

A simple yet useful XT30 (Male) to XT60 (Female) adapter without a cable. Check out our other tools and building supplies! Includes  1x XT30 to XT...

This adapter cable goes from XT60 or XT30 to male brass banana plugs. These are great for smaller single battery chargers that have positive and ne...

We have expanded our line of building supplies with the addition of a variety of clear heat shrinks. Good for a wide range of uses, from making you...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 3S batteries! Note: Please chec...

Dont toss your battery just because the balance leads got chewed up in your props! Repair the balance leads on your 2S batteries!  Note: Please che...

This is a great and quick "solder n' go" product if you need a capacitor for your quad. The capacitor and pigtail come pre-soldered together and al...

This new SMA Extension can be used for a variety of FPV applications. This can be mounted on your long range build to move your antenna away from a...

Individual spare replacement female MMCX connector with solder posts for repairing your battered VTX. We've got replacement U.FL connectors as well...

Our barrel jack to female XT60 connector cable allows you to charge your Fat Shark goggle packs (and other packs with barrel jack discharge leads) ...