FPV Drone Electronics

HDZero AIO5 is the world’s first digital video AIO, enabling bind and fly 65mm whoops to weigh less than 19.4g. AIO5 integrates a F4 flight control...

The Lumenier LUX HD AIO G4 Flight Controller + ESC is a powerful AIO ready to power the DJI O3 in a simple configuration. It also works great on st...

This kit offers improved VTX with a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibili...

Experience unparalleled performance with the Walksnail Avatar Moonlight 4K Starlight Kit. Featuring 4k 60fps with built-in EIS and support for Gyro...

Lightweight design, ultra-thin experience  The Walksnail Avatar VRX Kit Combo is only 83g and comes with 114x55x22mm; a size easy to carry. Walks...

The HappyModel X12 2S AIO Whoop Flight Controller (F4 FC / 12A 4in1 ESC / 25-400mW VTX) AIO board featuring an F4 Flight Controller, onboard 12A 4-...

Introducing the Walksnail Avatar HD Kit V2 (Dual Antenna Version)! This kit offers improved VTX with a new higher quality casing and is equipped wi...

As a continuance of the F411 chip, the V5 FC board is upgraded from the F4 20A V3 FC board. F411 4S 20A Toothpick Brushless Flight Controller V5 ad...

JHEMCU GHF745 F7 HD 3-6S AIO Whoop/Toothpick Flight Controller is the perfect choice for professional racing, freestyle, long-range, & cinemati...

This ultra-light F411 10A 1-2S AIO integrated flight controller comes with ExpressLRS 2.4G receiver and 400mW 5.8GHz adjustable power video transmi...

iFlight Blitz F411 1S 5A Toothpick/Whoop Flight Controller w/ 25-50mW VTX & ELRS RX is perfect for all of your lightweight builds. It is a Flig...

This is our new iFlight BLITZ series AIO FCs for your ultimate build. A future proof all-in-one FC to step up the game and make some more room for ...

The BetaFPV V1 F4 2-3S AIO is the perfect choice for modern Whoop/Toothpick builds. Featuring an F4 AIO Flight Controller and 20A 4-in-1...

The Super F405HD ELRS AIO flight controller comes with integrated UART 2.4GHz ExpressLRS receiver and 20A Blheli_s ESC(Bluejay firmware pre-install...

We are glad to introduce a new member of GEPRC FC AIO, the GEP-F722-45A AIO. The F722 AIO adopts MCU STM32F722, which has a powerful performance an...

Until now, 1S tiny whoops were the last type of FPV drone that couldn't be converted to digital video due to voltage and weight limits. HDZero Whoo...

The world’s first AIO 5in1 F4 flight controller with an integrated SPI 2.4GHz ExpressLRS receiver has been launched. The flight controller integrat...

The Skystars Jupiter F405 45A AIO is a robust board that combines a flight controller and ESCs, with a 25.5 x 25.5mm mount, suitable for 3-4" and l...

HDZero Whoop Lite 25x25 200mw Digital HD VTX - U.FL is here for your drone needs! Perfect for those feather-lite drones where saving eve...

Equip your 2-4S drone with the HappyModel CrazyF411 F4 Flight Controller. Enjoy flying with its 20A 8Bit 4in1 ESC and ELRS 2.4GHz receiver fe...

The F4126 is HakRC's new whoop style flight controller/ESC AIO board for ultralight and whoop build. This FC features a Barometer which is rare to ...

The NewBeeDrone Hummingbird V3 AIO Flight Controller is designed for the Hummingbird F4 V2 ELRS BNF or Hummingbird F4 V3 ELRS BNF drone. Enjoy a...

Super F405HD AIO with ELRS. Meant for the Caddx Gofilm 20, but perfect for your next 2-4S build! Check out pre-built quads, and our CADDX selection...

The Darwin FPV AIO is great for Ultralight and Whoop builds. It even come with a capacitor pre-soldered for convenience! With AIOs becoming more po...

Matek has done it again with another top of the line wing FC. You won't find any better quality in the wing game. These parts are trusted by even t...

The HGLRC Specter F722 4-6S AIO Whoop/Toothpick Flight Controller (w/ 40A 8Bit 4in1 ESC) comes with an STM32F722 processor, MPU6000 gyroscope, a ca...

Smart mounting VTX, fits 16x16, 20x20, and whoop/toothpick mounting patterns. Checkout our VTX section and our full collection of HGLRC products! F...

Introducing a new 1S AIO from T-Motor which is perfect for small whoops and toothpick quads! Featuring full BLHeli_32 ESC Firmware which gives you ...

The BetaFPV F4 1S 12A AIO Brushless Flight Controller V2.2 is the default FC for Cetus X brushless whoop quadcopter, also great for 85mm whoop dron...

The VTX has a new higher quality casing and is equipped with 20mm x 20mm and 25mm x 25mm mounting holes, allowing compatibility with a vast array o...

Matek has done it again with another top of the line Matek F405-WTE Wing Flight Controller w/ Integrated ESP32 & RX . This time with an integra...

The T-Motor F7 AIO Flight Controller is designed for serious drone pilots, offering a 3-6S compatible 45A 8Bit 4in1 ESC for optimal power...

Experience unparalleled flight performance with the HGLRC Specter AIO, designed to elevate your flying experience. This advanced flight controller ...

Introducing the GEPRC Taker F411 8bit 12A AIO Flight Controller, the perfect addition to your mini FPV drone. It is packed with features like ICM-4...

The G4 features Betaflight compatibility and is the first of its kind. It contains 4 35A AM32 ESCs, 6S max and the QF32MTF4AK8U7 on the AIO board, ...

The Happymodel SuperX AIO combines an F4 Flight Controller with a 5A 1S BLHeli_S ESC. This powerful AIO provides exceptional flight performance, ma...

Spare replacement Flight Controller for the Happymodel Mobula 6, and an all around incredible little TRUE AIO for any 1S brushless build!  Check ou...

There is nothing like the experience of flying an FPV drone, but building these marvelous machines is more complex than it needs to be. With Tramp,...

This convenient Happymodel USB Charger is tailored for a 200-400 mAh battery. It has an LED light to indicate when charging is complete, as well as...

This is a spare replacement part for the EMAX BNF Nanohawk 1S Brushless Analog Whoop! Also a great choice for building your own whoops! Check out a...

F722 2-6S AIO 35A FC is a very reliable FC that is made to meet your advanced FPV needs. Comes with an F722 chip and a BLHeli_32 ESC, this board pr...

This reliable flight controller with built-in 35A 8Bit 4in1 ESC designed by T-Motor offers efficient power for your Whoop/Toothpick. The F7 provide...

This AIO has a rating of IP67, In ideal conditions submersion of 1 meter for 30 minutes can be achieved.  Introducing the all-new DarwinFPV Hulk AI...

An awesome little AIO from T-Motor, Coming with 6A ESCs, ELRS 2.4G onboard reciever, and a 50mw VTX with OSD! This whoop AIO board truly does it al...

An awesome little AIO from iFlight, Coming with 20A ESCs, DJI ready header for an air unit or Caddx Vista, and a nice open pad layout to get all yo...

This is a unique stack for the demands of the industry today. It has a 25.5x25.5 M2 (Whoop) mount pattern because there are now many frames that ar...